https://wiki.knoxmakers.org/api.php?action=feedcontributions&feedformat=atom&user=Ray 2026-04-09T16:34:04Z User contributions MediaWiki 1.44.0 https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4074 2023-02-14T05:21:53Z

<p>Ray: </p> <hr /> <div><br /> Beginner, no experience required:&lt;br&gt;<br /> <br /> Electronics 101: Intro to Electronics&lt;br&gt;<br /> <br /> Schematics and Breadboarding&lt;br&gt;<br /> <br /> Intro to Arduino&lt;br&gt;<br /> <br /> Intro to DSP Filters&lt;br&gt;<br /> <br /> Intro to AC Circuits (voltage, current, resistance, ohm’s law)&lt;br&gt;<br /> <br /> <br /> Intermediate:<br /> Intro to Oscilloscopes (familiar with voltage, current, resistance) <br /> Intro to Transistors (should be familiar with voltage, current, resistance, ohm’s law)<br /> Intro to Analog Circuits (should be familiar with voltage, current, resistance, ohm’s law)<br /> Power Supplies (should be familiar with voltage, current, ohm’s law)<br /> Noise, Filters and the Frequency Domain (voltage, current, ohm’s law, sine/square waveforms)<br /> Intermediate KiCAD<br /> Using rotary encoders with microcontrollers)<br /> <br /> Advanced:<br /> Advanced PCB Layout<br /> Advanced Serial Communications (I2C, SPI experience)<br /> <br /> == Various Electronics Classes We’ve Put On ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;100&quot;| Class Type<br /> !width=&quot;250&quot;| Description<br /> !width=&quot;250&quot;| Suggested Experiencce<br /> |-<br /> | Project<br /> | Arduino Music Box<br /> | No experience required<br /> |-<br /> | Project<br /> | Intro to KiCAD, design a PCB<br /> | No experience required<br /> |-<br /> | Project<br /> | Custom Macro Keyboard<br /> | No experience required<br /> |}<br /> &lt;br&gt;<br /> &lt;br&gt;<br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> |-<br /> | [[Soldered Art Kit | KM-008]]<br /> | Free form artistic soldering<br /> | 4 resistors, 4 LEDs, 1 switch, 1 USB power jack, and whatever you add to it<br /> | Through-hole<br /> | [[File:KM-008-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4073 2023-02-14T05:16:41Z

<p>Ray: </p> <hr /> <div><br /> Beginner, no experience required:<br /> Electronics 101: Intro to Electronics<br /> Schematics and Breadboarding<br /> Intro to Arduino<br /> Intro to DSP Filters<br /> Intro to AC Circuits (voltage, current, resistance, ohm’s law)<br /> <br /> Intermediate:<br /> Intro to Oscilloscopes (familiar with voltage, current, resistance) <br /> Intro to Transistors (should be familiar with voltage, current, resistance, ohm’s law)<br /> Intro to Analog Circuits (should be familiar with voltage, current, resistance, ohm’s law)<br /> Power Supplies (should be familiar with voltage, current, ohm’s law)<br /> Noise, Filters and the Frequency Domain (voltage, current, ohm’s law, sine/square waveforms)<br /> Intermediate KiCAD<br /> Using rotary encoders with microcontrollers)<br /> <br /> Advanced:<br /> Advanced PCB Layout<br /> Advanced Serial Communications (I2C, SPI experience)<br /> <br /> == Various Electronics Classes We’ve Put On ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Class Type<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Suggested Experiencce<br /> |-<br /> | Project<br /> | Arduino Music Box<br /> | No experience required<br /> |-<br /> | Project<br /> | Intro to KiCAD, design a PCB<br /> | No experience required<br /> |-<br /> | Project<br /> | Custom Macro Keyboard<br /> | No experience required<br /> <br /> |}<br /> <br /> <br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> |-<br /> | [[Soldered Art Kit | KM-008]]<br /> | Free form artistic soldering<br /> | 4 resistors, 4 LEDs, 1 switch, 1 USB power jack, and whatever you add to it<br /> | Through-hole<br /> | [[File:KM-008-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4072 2023-02-14T05:10:02Z

<p>Ray: </p> <hr /> <div><br /> Beginner, no experience required:<br /> Electronics 101: Intro to Electronics<br /> Schematics and Breadboarding<br /> Intro to Arduino<br /> Intro to DSP Filters<br /> Intro to AC Circuits (voltage, current, resistance, ohm’s law)<br /> <br /> Intermediate:<br /> Intro to Oscilloscopes (familiar with voltage, current, resistance) <br /> Intro to Transistors (should be familiar with voltage, current, resistance, ohm’s law)<br /> Intro to Analog Circuits (should be familiar with voltage, current, resistance, ohm’s law)<br /> Power Supplies (should be familiar with voltage, current, ohm’s law)<br /> Noise, Filters and the Frequency Domain (voltage, current, ohm’s law, sine/square waveforms)<br /> Intermediate KiCAD<br /> Using rotary encoders with microcontrollers)<br /> <br /> Advanced:<br /> Advanced PCB Layout<br /> Advanced Serial Communications (I2C, SPI experience)<br /> <br /> <br /> == Various Electronics Classes We’ve Put On ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Class Type<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Suggested Experiencce<br /> |-<br /> | Project<br /> | Arduino Music Box<br /> | No experience required<br /> |-<br /> | Project<br /> | Intro to KiCAD, design a PCB<br /> | No experience required<br /> |-<br /> | Project<br /> | Custom Macro Keyboard<br /> | No experience required<br /> <br /> |}<br /> <br /> &lt;br&gt;<br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> |-<br /> | [[Soldered Art Kit | KM-008]]<br /> | Free form artistic soldering<br /> | 4 resistors, 4 LEDs, 1 switch, 1 USB power jack, and whatever you add to it<br /> | Through-hole<br /> | [[File:KM-008-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4071 2023-02-14T05:09:46Z

<p>Ray: </p> <hr /> <div><br /> Beginner, no experience required:<br /> Electronics 101: Intro to Electronics<br /> Schematics and Breadboarding<br /> Intro to Arduino<br /> Intro to DSP Filters<br /> Intro to AC Circuits (voltage, current, resistance, ohm’s law)<br /> <br /> Intermediate:<br /> Intro to Oscilloscopes (familiar with voltage, current, resistance) <br /> Intro to Transistors (should be familiar with voltage, current, resistance, ohm’s law)<br /> Intro to Analog Circuits (should be familiar with voltage, current, resistance, ohm’s law)<br /> Power Supplies (should be familiar with voltage, current, ohm’s law)<br /> Noise, Filters and the Frequency Domain (voltage, current, ohm’s law, sine/square waveforms)<br /> Intermediate KiCAD<br /> Using rotary encoders with microcontrollers)<br /> <br /> Advanced:<br /> Advanced PCB Layout<br /> Advanced Serial Communications (I2C, SPI experience)<br /> <br /> <br /> == Various Electronics Classes We’ve Put On ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Class Type<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Suggested Experiencce<br /> |-<br /> | Project<br /> | Arduino Music Box<br /> | No experience required<br /> |-<br /> | Project<br /> | Intro to KiCAD, design a PCB<br /> | No experience required<br /> |-<br /> | Project<br /> | Custom Macro Keyboard<br /> | No experience required<br /> <br /> |}<br /> <br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> |-<br /> | [[Soldered Art Kit | KM-008]]<br /> | Free form artistic soldering<br /> | 4 resistors, 4 LEDs, 1 switch, 1 USB power jack, and whatever you add to it<br /> | Through-hole<br /> | [[File:KM-008-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4070 2023-02-14T05:09:10Z

<p>Ray: </p> <hr /> <div>== Various Electronics Classes We’ve Put On ==<br /> <br /> Beginner, no experience required:<br /> Electronics 101: Intro to Electronics<br /> Schematics and Breadboarding<br /> Intro to Arduino<br /> Intro to DSP Filters<br /> Intro to AC Circuits (voltage, current, resistance, ohm’s law)<br /> <br /> Intermediate:<br /> Intro to Oscilloscopes (familiar with voltage, current, resistance) <br /> Intro to Transistors (should be familiar with voltage, current, resistance, ohm’s law)<br /> Intro to Analog Circuits (should be familiar with voltage, current, resistance, ohm’s law)<br /> Power Supplies (should be familiar with voltage, current, ohm’s law)<br /> Noise, Filters and the Frequency Domain (voltage, current, ohm’s law, sine/square waveforms)<br /> Intermediate KiCAD<br /> Using rotary encoders with microcontrollers)<br /> <br /> Advanced:<br /> Advanced PCB Layout<br /> Advanced Serial Communications (I2C, SPI experience)<br /> <br /> <br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Class Type<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Suggested Experiencce<br /> |-<br /> | Project<br /> | Arduino Music Box<br /> | No experience required<br /> |-<br /> | Project<br /> | Intro to KiCAD, design a PCB<br /> | No experience required<br /> |-<br /> | Project<br /> | Custom Macro Keyboard<br /> | No experience required<br /> <br /> |}<br /> <br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> |-<br /> | [[Soldered Art Kit | KM-008]]<br /> | Free form artistic soldering<br /> | 4 resistors, 4 LEDs, 1 switch, 1 USB power jack, and whatever you add to it<br /> | Through-hole<br /> | [[File:KM-008-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4069 2023-02-14T05:07:43Z

<p>Ray: </p> <hr /> <div>== Various Electronics Classes We’ve Put On ==<br /> <br /> Beginner, no experience required:<br /> Electronics 101: Intro to Electronics<br /> Schematics and Breadboarding<br /> Intro to Arduino<br /> Intro to DSP Filters<br /> Intro to AC Circuits (voltage, current, resistance, ohm’s law)<br /> <br /> Intermediate:<br /> Intro to Oscilloscopes (familiar with voltage, current, resistance) <br /> Intro to Transistors (should be familiar with voltage, current, resistance, ohm’s law)<br /> Intro to Analog Circuits (should be familiar with voltage, current, resistance, ohm’s law)<br /> Power Supplies (should be familiar with voltage, current, ohm’s law)<br /> Noise, Filters and the Frequency Domain (voltage, current, ohm’s law, sine/square waveforms)<br /> Intermediate KiCAD<br /> Using rotary encoders with microcontrollers)<br /> <br /> Advanced:<br /> Advanced PCB Layout<br /> Advanced Serial Communications (I2C, SPI experience)<br /> <br /> <br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Class Type<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Suggested Experiencce<br /> |-<br /> |<br /> | Project<br /> | Arduino Music Box<br /> | No experience required<br /> |-<br /> | Project<br /> | Intro to KiCAD, design a PCB<br /> | No experience required<br /> |-<br /> | Project<br /> | Custom Macro Keyboard<br /> | No experience required<br /> <br /> |}<br /> <br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> |-<br /> | [[Soldered Art Kit | KM-008]]<br /> | Free form artistic soldering<br /> | 4 resistors, 4 LEDs, 1 switch, 1 USB power jack, and whatever you add to it<br /> | Through-hole<br /> | [[File:KM-008-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4068 2023-02-12T14:13:32Z

<p>Ray: </p> <hr /> <div>== Various Electronics Classes We’ve Put On ==<br /> Product Classes<br /> Arduino Music Box<br /> Macro Keyboard<br /> Intro to KiCAD<br /> <br /> Beginner, no experience required:<br /> Electronics 101: Intro to Electronics<br /> Schematics and Breadboarding<br /> Intro to Arduino<br /> Intro to DSP Filters<br /> Intro to AC Circuits (voltage, current, resistance, ohm’s law)<br /> <br /> Intermediate:<br /> Intro to Oscilloscopes (familiar with voltage, current, resistance) <br /> Intro to Transistors (should be familiar with voltage, current, resistance, ohm’s law)<br /> Intro to Analog Circuits (should be familiar with voltage, current, resistance, ohm’s law)<br /> Power Supplies (should be familiar with voltage, current, ohm’s law)<br /> Noise, Filters and the Frequency Domain (voltage, current, ohm’s law, sine/square waveforms)<br /> Intermediate KiCAD<br /> Using rotary encoders with microcontrollers)<br /> <br /> Advanced:<br /> Advanced PCB Layout<br /> Advanced Serial Communications (I2C, SPI experience)<br /> <br /> <br /> == Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> |-<br /> | [[Soldered Art Kit | KM-008]]<br /> | Free form artistic soldering<br /> | 4 resistors, 4 LEDs, 1 switch, 1 USB power jack, and whatever you add to it<br /> | Through-hole<br /> | [[File:KM-008-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Main_Page&diff=4067 2023-02-12T02:18:08Z

<p>Ray: /* Functional Areas */</p> <hr /> <div>__NOTOC__<br /> '''Welcome to the Knox Makers Wiki!'''<br /> <br /> ''Write Access to this wiki is limited to members.''<br /> <br /> =About Knox Makers=<br /> <br /> Here is a [[Space History| history of Knox Makers ]]<br /> <br /> List of [https://knoxmakers.org/tools/ tools]<br /> <br /> Link to [[ Tool Docuentation | Tool Documentation and Manual pdfs ]]<br /> <br /> ==Members==<br /> <br /> [[Membership Rules]] - Here is a place to find the rules that our members are expected to follow.<br /> <br /> [[How to Become a Member]] - An overview of the process.<br /> <br /> <br /> ==Functional Areas==<br /> Knox Makers has several distinct areas in our workshop, and each area has an area leader known as a [https://knoxmakers.org/wiki/czar Czar] (or Czarina). The areas and their respective Czars/Czarinas are:<br /> *Hospitality (including concessions and the hangout area) - [https://knoxmakers.org/member/ray/ Ray] &amp; [Christine]<br /> *3D Printing/Scanning - [https://knoxmakers.org/member/cooper.wade/ Cooper]<br /> *Arts &amp; Crafts - [https://knoxmakers.org/member/sean/ Sean]<br /> *[[Electronics]] - [https://knoxmakers.org/member/ray/ Ray]<br /> *Fiber Arts - [https://knoxmakers.org/member/joslin/ Sue]<br /> *[[Woodworking]] - [https://knoxmakers.org/member/brian-greenh0e/ Brian]<br /> *[[Machining]] - [https://knoxmakers.org/member/billy/ Billy] <br /> *[[Metalworking]] - [https://knoxmakers.org/member/joehall31415/ Joe] <br /> *[[Lasercutting]] - [https://knoxmakers.org/member/jondale/ Jondale]<br /> *Blacksmithing - [https://knoxmakers.org/member/andrewm/ Andrew]<br /> *Safety and First Aid - [https://knoxmakers.org/member/tonybaker/ Tony]<br /> *Classroom (including A/V systems, administrative storage and server rack) - [https://knoxmakers.org/board-of-directors/ Board of Directors]<br /> *Rental Bays (including work bays, pallet racks, and long goods storage) - [https://knoxmakers.org/board-of-directors/ Board of Directors]<br /> <br /> ==Corporate==<br /> [[Vision]] - Our Vision Statement, Mission Statement, and Core Values<br /> <br /> [[Board of Directors]] - A list of our current directors and their working items.<br /> <br /> [[Bylaws]] - The corporate organization and other major items details are covered here.<br /> <br /> [[Officer Duties]] - A description of duties performed by the board of directors.<br /> <br /> [[Meeting Minutes|Meeting Minutes]] - Minutes from our monthly board meetings<br /> <br /> [[Logo]] - Knox Makers Logo<br /> <br /> [[Knox Makers Privacy Policy]] - Privacy Policy</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=4018 2022-10-07T05:24:03Z

<p>Ray: </p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [Coming soon: PDF via Github]&lt;br&gt;<br /> [Coming soon: Build Video]<br /> <br /> == Design ==<br /> <br /> [[https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete%20adc schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=4017 2022-10-07T05:23:25Z

<p>Ray: </p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [Coming soon: PDF via Github]<br /> [Coming soon: Build Video]<br /> <br /> == Design ==<br /> <br /> [[https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete%20adc schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Soldered_Art_Kit&diff=4016 2022-10-07T05:22:11Z

<p>Ray: </p> <hr /> <div>[[File:KM-008-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> This kit takes a different angle on art. The base is powered by a USB micro plug and has 4 LEDs that illuminate whatever you choose to build on this versatile platform. This kit can be assembled by someone with novice soldering skills.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Micro jack || -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 4 || resistors, 1206 size || R1-R4<br /> |-<br /> | 4 || LEDs, 0805 size || D1-D4<br /> |-<br /> | ? || Whatever you choose to add ||<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [Coming: PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [[Coming: schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Soldered_Art_Kit&diff=4015 2022-10-07T05:16:41Z

<p>Ray: </p> <hr /> <div>[[File:KM-008-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> This kit takes a different angle on art. The base is powered by a USB micro plug and has 4 LEDs that illuminate whatever you choose to build on this versatile platform. This kit can be assembled by someone with novice soldering skills.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Micro jack || -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 4 || resistors, 1206 size || R1-R4<br /> |-<br /> | 4 || LEDs, 0805 size || D1-D4<br /> |-<br /> | ? || Whatever you choose to add ||<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Soldered_Art_Kit&diff=4014 2022-10-07T05:15:52Z

<p>Ray: Created page with &quot;thumb == Description == This kit takes a different angle on art. The base is powered by a USB micro plug and has 4 LEDs that illuminate whatever yo...&quot;</p> <hr /> <div>[[File:KM-007-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> This kit takes a different angle on art. The base is powered by a USB micro plug and has 4 LEDs that illuminate whatever you choose to build on this versatile platform. This kit can be assembled by someone with novice soldering skills.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Micro jack || -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 4 || resistors, 1206 size || R1-R4<br /> |-<br /> | 4 || LEDs, 0805 size || D1-D4<br /> |-<br /> | ? || Whatever you choose to add ||<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-006%20serpenski%20triangle/km-006%20build%20instructions.pdf PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-006%20serpenski%20triangle schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=File:KM-008-board.png&diff=4013 2022-10-07T05:13:30Z

<p>Ray: </p> <hr /> <div></div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4012 2022-10-07T05:13:11Z

<p>Ray: </p> <hr /> <div>== Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> |-<br /> | [[Soldered Art Kit | KM-008]]<br /> | Free form artistic soldering<br /> | 4 resistors, 4 LEDs, 1 switch, 1 USB power jack, and whatever you add to it<br /> | Through-hole<br /> | [[File:KM-008-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=COVID-19_kit&diff=4011 2022-10-05T03:34:25Z

<p>Ray: </p> <hr /> <div>[[File:KM-004-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers COVID-19 educational electronics kit (KM-004) features eight self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 8 || self-flashing LEDs, 3mm || -<br /> |-<br /> | 8 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-004%20covid-19/km-004%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> [https://youtu.be/JnXowPm3n2Q Build Video]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-004%20covid-19 schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Candy_cane_kit&diff=4010 2022-10-05T03:31:42Z

<p>Ray: </p> <hr /> <div>[[File:KM-003-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Candy Cane educational electronics kit (KM-003) features nineteen self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 19 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19<br /> |-<br /> | 19 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19<br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon!&lt;br&gt;<br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-003%20candy%20cane/km-003%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> [https://youtu.be/S0EQCm51Cns Build Video]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-003%20candy%20cane schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Holiday_star_kit&diff=4009 2022-10-05T03:30:33Z

<p>Ray: </p> <hr /> <div>[[File:KM-002-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Holiday Star educational electronics kit (KM-002) features ten self-flashing LEDs and is externally powered through a USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 10 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10<br /> |-<br /> | 10 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-002%20holiday%20star/km-002%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> [https://youtu.be/Ito8eYmMRZc Build Video]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-002%20holiday%20star schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Logo_badge_kit&diff=4008 2022-10-05T03:29:26Z

<p>Ray: </p> <hr /> <div>[[File:KM-001-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || CR2032 coin cell holder, Keystone 3035 footprint || -<br /> |-<br /> | 1 || CR2032 battery || -<br /> |-<br /> | 6 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6<br /> |-<br /> | 6 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-001%20logo%20badge/km-001%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> [https://youtu.be/ryvMryq6Riw Build Video]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-001%20logo%20badge schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=4007 2022-09-26T04:49:56Z

<p>Ray: </p> <hr /> <div>== Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> !width=&quot;50&quot;| Kit Number<br /> !width=&quot;150&quot;| Description<br /> !width=&quot;200&quot;| Components<br /> !width=&quot;200&quot;| Technology<br /> !width=&quot;150&quot;| Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Optical_Theremin_Kit&diff=4004 2022-09-25T04:39:23Z

<p>Ray: </p> <hr /> <div>[[File:KM-007-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Optical Theremin educational electronics kit (KM-006) features two oscillators, a flashing LED, a light detector and a speaker, and is powered by a 9V battery.<br /> Surface mount construction and low parts density make this kit ideal for the soldering novice, but note that small surface mount components require tweezers and a small solder iron tip for assembly.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || 9V battery || -<br /> |-<br /> | 1 || 9V battery clip|| -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 4 || resistors, 1206 size || R1, R2, R4, R7<br /> |-<br /> | 2 || potentiometers, 100k || R3, R5<br /> |-<br /> | 1 || light detecting resistor || R6<br /> |-<br /> | 1 || LED, 0805 size || D1<br /> |-<br /> | 2 || capacitors, 0603 size || C2, C4<br /> |-<br /> | 2 || capacitors, 0805 size || C3, C5<br /> |-<br /> | 1 || capacitor, 1206 size || C1<br /> |-<br /> | 2 || integrated circuits, LM555, SOIC-8 size || U1, U2<br /> |-<br /> | 1 || 40mm speaker || SPK1<br /> |-<br /> | 1 || small diameter solder, solder wick || -<br /> |-<br /> | 1 || extra practice components, 0603, 0805, 1208 size || -<br /> <br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-007%20optical%20theremin/km-007%20build%20instructions.pdf PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-007%20optical%20theremin schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Optical_Theremin_Kit&diff=4003 2022-09-25T04:38:06Z

<p>Ray: </p> <hr /> <div>[[File:KM-007-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Optical Theremin educational electronics kit (KM-006) features two oscillators, a flashing LED, a light detector and a speaker, and is powered by a 9V battery.<br /> Surface mount construction and low parts density make this kit ideal for the soldering novice, but note that small surface mount components require tweezers and a small solder iron tip for assembly.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || 9V battery || -<br /> |-<br /> | 1 || 9V battery clip|| -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 4 || resistors, 1206 size || R1, R2, R4, R7<br /> |-<br /> | 2 || potentiometers, 100k || R3, R5<br /> |-<br /> | 1 || light detecting resistor || R6<br /> |-<br /> | 1 || LED, 0805 size || D1<br /> |-<br /> | 2 || capacitors, 0603 size || C2, C4<br /> |-<br /> | 2 || capacitors, 0805 size || C3, C5<br /> |-<br /> | 1 || capacitor, 1206 size || C1<br /> |-<br /> | 2 || integrated circuits, LM555, SOIC-8 size || U1, U2<br /> |-<br /> | 1 || 40mm speaker || SPK1<br /> |-<br /> | 1 || small diameter solder, solder wick || -<br /> |-<br /> | 1 || extra practice components, 0603, 0805, 1208 size || -<br /> <br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-007%20optical%20theremin/km-007%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-007%20optical%20theremin schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Candy_cane_kit&diff=4002 2022-09-25T04:25:43Z

<p>Ray: </p> <hr /> <div>[[File:KM-003-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Candy Cane educational electronics kit (KM-003) features nineteen self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 19 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19<br /> |-<br /> | 19 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19<br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon!&lt;br&gt;<br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-003%20candy%20cane/km-003%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-003%20candy%20cane schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Candy_cane_kit&diff=4001 2022-09-25T04:25:34Z

<p>Ray: </p> <hr /> <div>[[File:KM-003-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Candy Cane educational electronics kit (KM-003) features nineteen self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 19 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19<br /> |-<br /> | 19 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19<br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon!&lt;br&gt;<br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-003%20candy%20cane/km-003%20build%20instructions.pdfPDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-003%20candy%20cane schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Serpenski_Triangle_Kit&diff=4000 2022-09-25T04:24:24Z

<p>Ray: </p> <hr /> <div>[[File:KM-006-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Serpenski Triangle educational electronics kit (KM-006) features nine self-flashing LEDs and is powered by a USB micro jack. Surface mount construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Micro jack || -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 9 || resistors, 1206 size || R1-R9<br /> |-<br /> | 9 || LEDs, 0805 size || D1-D9<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-006%20serpenski%20triangle/km-006%20build%20instructions.pdf PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-006%20serpenski%20triangle schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Optical_Theremin_Kit&diff=3999 2022-09-20T20:43:18Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-007-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Optical Theremin educational electronics kit (KM-006) features two oscillators, a flashing LED, a light detector and a speaker, and is powered by a 9V battery.<br /> Surface mount construction and low parts density make this kit ideal for the soldering novice, but note that small surface mount components require tweezers and a small solder iron tip for assembly.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || 9V battery || -<br /> |-<br /> | 1 || 9V battery clip|| -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 4 || resistors, 1206 size || R1, R2, R4, R7<br /> |-<br /> | 2 || potentiometers, 100k || R3, R5<br /> |-<br /> | 1 || light detecting resistor || R6<br /> |-<br /> | 1 || LED, 0805 size || D1<br /> |-<br /> | 2 || capacitors, 0603 size || C2, C4<br /> |-<br /> | 2 || capacitors, 0805 size || C3, C5<br /> |-<br /> | 1 || capacitor, 1206 size || C1<br /> |-<br /> | 2 || integrated circuits, LM555, SOIC-8 size || U1, U2<br /> |-<br /> | 1 || 40mm speaker || SPK1<br /> |-<br /> | 1 || small diameter solder, solder wick || -<br /> |-<br /> | 1 || extra practice components, 0603, 0805, 1208 size || -<br /> <br /> |}<br /> <br /> == Instructions ==<br /> <br /> [[https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-007%20optical%20theremin/km-007%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-007%20optical%20theremin schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Optical_Theremin_Kit&diff=3998 2022-09-20T20:42:47Z

<p>Ray: </p> <hr /> <div>[[File:KM-007-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Optical Theremin educational electronics kit (KM-006) features two oscillators, a flashing LED, a light detector and a speaker, and is powered by a 9V battery.<br /> Surface mount construction and low parts density make this kit ideal for the soldering novice, but note that small surface mount components require tweezers and a small solder iron tip for assembly.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || 9V battery || -<br /> |-<br /> | 1 || 9V battery clip|| -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 4 || resistors, 1206 size || R1, R2, R4, R7<br /> |-<br /> | 2 || potentiometers, 100k || R3, R5<br /> |-<br /> | 1 || light detecting resistor || R6<br /> |-<br /> | 1 || LED, 0805 size || D1<br /> |-<br /> | 2 || capacitors, 0603 size || C2, C4<br /> |-<br /> | 2 || capacitors, 0805 size || C3, C5<br /> |-<br /> | 1 || capacitor, 1206 size || C1<br /> |-<br /> | 2 || integrated circuits, LM555, SOIC-8 size || U1, U2<br /> |-<br /> | 1 || 40mm speaker || SPK1<br /> |-<br /> | 1 || small diameter solder, solder wick || -<br /> |-<br /> | 1 || extra practice components, 0603, 0805, 1208 size || -<br /> <br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon: PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-007%20optical%20theremin schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Optical_Theremin_Kit&diff=3997 2022-09-20T20:42:24Z

<p>Ray: Created page with &quot;thumb == Description == The Knox Makers Optical Theremin educational electronics kit (KM-006) features two oscillators, a flashing LED, a light det...&quot;</p> <hr /> <div>[[File:KM-006-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Optical Theremin educational electronics kit (KM-006) features two oscillators, a flashing LED, a light detector and a speaker, and is powered by a 9V battery.<br /> Surface mount construction and low parts density make this kit ideal for the soldering novice, but note that small surface mount components require tweezers and a small solder iron tip for assembly.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || 9V battery || -<br /> |-<br /> | 1 || 9V battery clip|| -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 4 || resistors, 1206 size || R1, R2, R4, R7<br /> |-<br /> | 2 || potentiometers, 100k || R3, R5<br /> |-<br /> | 1 || light detecting resistor || R6<br /> |-<br /> | 1 || LED, 0805 size || D1<br /> |-<br /> | 2 || capacitors, 0603 size || C2, C4<br /> |-<br /> | 2 || capacitors, 0805 size || C3, C5<br /> |-<br /> | 1 || capacitor, 1206 size || C1<br /> |-<br /> | 2 || integrated circuits, LM555, SOIC-8 size || U1, U2<br /> |-<br /> | 1 || 40mm speaker || SPK1<br /> |-<br /> | 1 || small diameter solder, solder wick || -<br /> |-<br /> | 1 || extra practice components, 0603, 0805, 1208 size || -<br /> <br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon: PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-007%20optical%20theremin schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=3996 2022-09-20T20:34:30Z

<p>Ray: /* Design */</p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon: PDF via Github<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [[https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete%20adc schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=COVID-19_kit&diff=3995 2022-09-20T20:34:03Z

<p>Ray: </p> <hr /> <div>[[File:KM-004-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers COVID-19 educational electronics kit (KM-004) features eight self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 8 || self-flashing LEDs, 3mm || -<br /> |-<br /> | 8 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-004%20covid-19/km-004%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: build video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-004%20covid-19 schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Candy_cane_kit&diff=3994 2022-09-20T20:33:37Z

<p>Ray: /* Design */</p> <hr /> <div>[[File:KM-003-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Candy Cane educational electronics kit (KM-003) features nineteen self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 19 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19<br /> |-<br /> | 19 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19<br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon!&lt;br&gt;<br /> PDF via GitHub&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-003%20candy%20cane schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Holiday_star_kit&diff=3993 2022-09-20T20:33:17Z

<p>Ray: </p> <hr /> <div>[[File:KM-002-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Holiday Star educational electronics kit (KM-002) features ten self-flashing LEDs and is externally powered through a USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 10 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10<br /> |-<br /> | 10 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-002%20holiday%20star/km-002%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-002%20holiday%20star schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Logo_badge_kit&diff=3992 2022-09-20T20:32:46Z

<p>Ray: </p> <hr /> <div>[[File:KM-001-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || CR2032 coin cell holder, Keystone 3035 footprint || -<br /> |-<br /> | 1 || CR2032 battery || -<br /> |-<br /> | 6 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6<br /> |-<br /> | 6 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-001%20logo%20badge/km-001%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-001%20logo%20badge schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Serpenski_Triangle_Kit&diff=3991 2022-09-20T20:31:06Z

<p>Ray: Created page with &quot;thumb == Description == The Knox Makers Serpenski Triangle educational electronics kit (KM-006) features nine self-flashing LEDs and is powered by...&quot;</p> <hr /> <div>[[File:KM-006-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Serpenski Triangle educational electronics kit (KM-006) features nine self-flashing LEDs and is powered by a USB micro jack. Surface mount construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Micro jack || -<br /> |-<br /> | 1 || Switch, SPDT || -<br /> |-<br /> | 9 || resistors, 1206 size || R1-R9<br /> |-<br /> | 9 || LEDs, 0805 size || D1-D9<br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon: PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-006%20serpenski%20triangle schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=3990 2022-09-20T20:27:32Z

<p>Ray: </p> <hr /> <div>== Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> ! Kit Number<br /> ! Description<br /> ! Components<br /> ! Technology<br /> ! Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | Surface mount learn to solder kit with 9 blinking LEDs<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Electronics&diff=3989 2022-09-20T20:26:44Z

<p>Ray: </p> <hr /> <div>== Electronics Kit Build Instructions ==<br /> <br /> {| cellspacing=&quot;0&quot; cellpadding=&quot;5&quot; border=&quot;1&quot; align=&quot;left&quot;<br /> |-<br /> ! Kit Number<br /> ! Description<br /> ! Components<br /> ! Technology<br /> ! Image<br /> |-<br /> | [[Logo badge kit|KM-001]]<br /> | Logo badge<br /> | 6 resistors, 6 blinking LEDs, battery holder<br /> | Thru-hole<br /> | [[File:KM-001-board.png|150px]]<br /> |-<br /> | [[Holiday star kit|KM-002]]<br /> | Holiday star<br /> | 10 resistors, 10 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-002-board.png|150px]]<br /> |-<br /> | [[Candy cane kit|KM-003]]<br /> | Candy cane<br /> | 19 resistors, 19 blinking LEDs<br /> | Thru-hole<br /> | [[File:KM-003-board.png|150px]]<br /> |-<br /> | [[COVID-19 kit | KM-004]]<br /> | Coronavirus<br /> | 8 resistors, 8 blinking LEDs, switch<br /> | Thru-hole<br /> | [[File:KM-004-board.png|150px]]<br /> |-<br /> | [[Discrete ADC Kit | KM-005]]<br /> | Discrete Analog to Digital Converter (ADC) with binary encoder<br /> | 3 capacitors, 11 LEDs, 34 resistors, potentiometer, switch 4 integrated circuits<br /> | Thru-hole<br /> | [[File:KM-005-board.png|150px]]<br /> |-<br /> | KM-006<br /> | [[Serpenski Triangle Kit | KM-006]]<br /> | 9 resistors, 9 LEDs, switch<br /> | Surface mount: 1206, 0805<br /> | [[File:KM-006-board.png|150px]]<br /> |-<br /> | [[Optical Theremin Kit | KM-007]]<br /> | Optical theremin<br /> | 5 capacitors, 1 LED, 23 resistors, switch, 2x integrated circuits, 9v battery clip, speaker<br /> | Surface mount: 1206, 0805, 0603<br /> | [[File:KM-007-board.png|150px]]<br /> <br /> |}</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=3988 2022-09-20T20:25:58Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon: PDF via Github<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [[https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete-adc schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=COVID-19_kit&diff=3987 2022-09-20T20:25:22Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-004-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers COVID-19 educational electronics kit (KM-004) features eight self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 8 || self-flashing LEDs, 3mm || -<br /> |-<br /> | 8 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-004%20covid-19%20v1/km-004%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: build video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-004%20covid-19%20v1 schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Holiday_star_kit&diff=3986 2022-09-20T20:24:41Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-002-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Holiday Star educational electronics kit (KM-002) features ten self-flashing LEDs and is externally powered through a USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 10 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10<br /> |-<br /> | 10 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-002%20holiday-star-kit-v1/km-002%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-002%20holiday-star-kit-v1 schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=COVID-19_kit&diff=3985 2022-09-20T20:00:18Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-004-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers COVID-19 educational electronics kit (KM-004) features eight self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 8 || self-flashing LEDs, 3mm || -<br /> |-<br /> | 8 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-004%20covid-19%20v1/instructions/KM-004%20Knox%20Makers%20Covid%2019%20V1%20Kit%20Instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: build video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-004%20covid-19%20v1 schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=COVID-19_kit&diff=3984 2022-09-20T20:00:00Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-004-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers COVID-19 educational electronics kit (KM-004) features eight self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 8 || self-flashing LEDs, 3mm || -<br /> |-<br /> | 8 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-004%20covid-19%20v1/instructions/KM-004%20Knox%20Makers%20Covid%2019%20V1%20Kit%20Instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon, build video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-004%20covid-19%20v1 schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Candy_cane_kit&diff=3983 2022-09-20T19:59:34Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-003-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Candy Cane educational electronics kit (KM-003) features nineteen self-flashing LEDs and is externally powered via USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 19 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19<br /> |-<br /> | 19 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19<br /> |}<br /> <br /> == Instructions ==<br /> <br /> Coming soon!&lt;br&gt;<br /> PDF via GitHub&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-003%20candy-cane-usb-v1 schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Holiday_star_kit&diff=3982 2022-09-20T19:59:11Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-002-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Holiday Star educational electronics kit (KM-002) features ten self-flashing LEDs and is externally powered through a USB connection. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB jack || -<br /> |-<br /> | 1 || SPDT switch || -<br /> |-<br /> | 10 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6, D7, D8, D9, D10<br /> |-<br /> | 10 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6, R7, R8, R9, R10<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-002%20holiday-star-kit-v1/instructions/KM-002%20Knox%20Makers%20Holiday%20Star%20V1%20Kit%20Instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-002%20holiday-star-kit-v1 schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Logo_badge_kit&diff=3981 2022-09-20T19:58:58Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-001-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || CR2032 coin cell holder, Keystone 3035 footprint || -<br /> |-<br /> | 1 || CR2032 battery || -<br /> |-<br /> | 6 || self-flashing LEDs, 3mm || D1, D2, D3, D4, D5, D6<br /> |-<br /> | 6 || resistors, 470 Ohm || R1, R2, R3, R4, R5, R6<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-001%20logo%20badge%20kit/km-001%20build%20instructions.pdf PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-001%20logo%20badge%20kit schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=3980 2022-09-20T19:58:39Z

<p>Ray: </p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete-adc PDF via GitHub]&lt;br&gt;<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [[https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete-adc schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=3979 2022-09-20T19:57:08Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete-adc PDF via GitHub]<br /> Coming soon: Build Video<br /> <br /> == Design ==<br /> <br /> [[https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete-adc schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=3978 2022-09-20T19:56:44Z

<p>Ray: </p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete-adc PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [[https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete-adc schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=3977 2022-09-20T19:56:12Z

<p>Ray: /* Instructions */</p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-005%20discrete-adc PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-001%20logo%20badge%20kit schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=3976 2022-09-20T19:55:40Z

<p>Ray: </p> <hr /> <div>[[File:KM-005-board.png|thumb]]<br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-001%20logo%20badge%20kit/km-001%20build%20instructions.pdf PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-001%20logo%20badge%20kit schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray https://wiki.knoxmakers.org/index.php?title=Discrete_ADC_Kit&diff=3975 2022-09-20T19:54:26Z

<p>Ray: </p> <hr /> <div>[[File:KM-001-board.png|thumb]]<br /> <br /> == Description ==<br /> <br /> The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.<br /> <br /> == Parts List ==<br /> <br /> {| class=&quot;wikitable&quot;<br /> |-<br /> ! Qty !! Part !! Designator(s)<br /> |-<br /> | 1 || printed circuit board || -<br /> |-<br /> | 1 || USB Jack || -<br /> |-<br /> | 3 || 0.1uF capacitors || C1-C3<br /> |-<br /> | 11 || LEDs, 5mm or 3mm || D1-D10, D12<br /> |-<br /> | 34 || 4.7k resistors || R1-R34<br /> |-<br /> | 1 || Potentiometer, 1M || R35<br /> |-<br /> | 1 || Switch, SPDT || SW1<br /> |-<br /> | 2 || LM339 quad comparator || U1, U2<br /> |-<br /> | 1 || L74HC148 encoder || U4<br /> |-<br /> | 1 || LM4030BCD 4.096V reference || U4<br /> |}<br /> <br /> == Instructions ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/blob/master/Solder%20Kits/km-001%20logo%20badge%20kit/km-001%20build%20instructions.pdf PDF via GitHub]<br /> <br /> == Design ==<br /> <br /> [https://github.com/KnoxMakers/Electronics/tree/master/Solder%20Kits/km-001%20logo%20badge%20kit schematic and board layout (Kicad), Gerber files]<br /> <br /> == See Other Kits ==<br /> <br /> [[Electronics]]</div>

Ray