Knox Makers Wiki - User contributions [en]

3D Printing - How To Print Extrusion Style

2025-01-23T21:32:31Z

Rhubarb: /* Step 1: Choose a Filament */

This page is meant to give details on how to print using the Extrusion style printers (often referred to as FDM or Fused Deposition Modeling).

= Step 1: Choose a Filament =
Choosing a filament is an important first step when you wish to print something. Below is a basic flow chart to help beginners choose which filament to pick.

[[File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png|800px]]

What is ABS, PLA, and PETG? They are different types of plastics. In the same way that a plastic food storage container differs from a plastic keyboard, different filaments have different properties such as stiffness, impact resistance, heat resistance, etc.
At Knox Makers we try to support ABS, PLA, and PETG with our printers. You can find rolls of each hanging in our filament station in the 3D printing zone (free for all members to use). If you are curious to learn more about the properties of various filaments, there are several external sites that give much more detail such as [https://www.simplify3d.com/resources/materials-guide/properties-table/ simplify3d.com] and [https://help.prusa3d.com/materials prusa3d.com].

= Step 2: Choose a Printer =
[[File:How To 3D Print - Extrusion - Step 2 - Choose Printer.png|800px]]

= Step 3: Prep Your MacGuffin =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Ender ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Prusa Mk 3 ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

= Step 4: Prep and Print =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Ender ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Prusa Mk 3 ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

= Step 5: Cleanup =
# Remove MacGuffin from Print Bed
# Clean Print Bed
# Unload Filament and Return To Filament Station
# Remove Your Contact Info

3D Printing - How To Print Extrusion Style

2025-01-23T21:28:45Z

Rhubarb: /* Step 1: Choose a Filament */

This page is meant to give details on how to print using the Extrusion style printers (often referred to as FDM or Fused Deposition Modeling).

= Step 1: Choose a Filament =
Choosing a filament is an important first step when you wish to print something. Below is a basic flow chart to help beginners choose which filament to pick.

[[File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png|800px]]

What is ABS, PLA, and PETG? They are different types of plastics. In the same way that a plastic food storage container differ from a plastic keyboard, different filaments have different properties such as stiffness, impact resistance, heat resistance, etc.
At Knox Makers we try to support ABS, PLA, and PETG with our printers. You can find rolls of each hanging in our filament station in the 3D printing zone (free for all members to use). If you are curious to learn more about the properties of various filaments, there are several external sites that give much more detail such as [https://www.simplify3d.com/resources/materials-guide/properties-table/ simplify3d.com] and [https://help.prusa3d.com/materials prusa3d.com].

= Step 2: Choose a Printer =
[[File:How To 3D Print - Extrusion - Step 2 - Choose Printer.png|800px]]

= Step 3: Prep Your MacGuffin =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Ender ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Prusa Mk 3 ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

= Step 4: Prep and Print =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Ender ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Prusa Mk 3 ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

= Step 5: Cleanup =
# Remove MacGuffin from Print Bed
# Clean Print Bed
# Unload Filament and Return To Filament Station
# Remove Your Contact Info

File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png

2025-01-23T21:07:37Z

Rhubarb: Rhubarb uploaded a new version of File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png

Flow chart showing how to choose a filament for 3D printing

3D Printing - How To Print Extrusion Style

2025-01-23T20:51:45Z

Rhubarb: /* Step 1: Choose a Filament */

This page is meant to give details on how to print using the Extrusion style printers (often referred to as FDM or Fused Deposition Modeling).

= Step 1: Choose a Filament =
Choosing a filament is an important first step when you wish to print something. Below is a basic flow chart to help beginners choose which filament to pick.

[[File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png|800px]]

What is ABS, PLA, and PETG? They are different types of plastics. In the same way that a plastic food storage container differ from a plastic keyboard, different filaments have different properties such as stiffness, impact resistance, heat resistance, etc.
At Knox Makers we try to support ABS, PLA, and PETG with our printers. If you are curious to learn more about the properties of various filaments, there are several external sites that give much more detail such as [https://www.simplify3d.com/resources/materials-guide/properties-table/ simplify3d.com] and [https://help.prusa3d.com/materials prusa3d.com].

= Step 2: Choose a Printer =
[[File:How To 3D Print - Extrusion - Step 2 - Choose Printer.png|800px]]

= Step 3: Prep Your MacGuffin =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Ender ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Prusa Mk 3 ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

= Step 4: Prep and Print =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Ender ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Prusa Mk 3 ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

= Step 5: Cleanup =
# Remove MacGuffin from Print Bed
# Clean Print Bed
# Unload Filament and Return To Filament Station
# Remove Your Contact Info

File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png

2025-01-23T20:41:27Z

Rhubarb: Rhubarb uploaded a new version of File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png

Flow chart showing how to choose a filament for 3D printing

3D Printing - How To Print Extrusion Style

2025-01-23T20:34:02Z

Rhubarb: /* Step 1: Choose a Filament */

This page is meant to give details on how to print using the Extrusion style printers (often referred to as FDM or Fused Deposition Modeling).

= Step 1: Choose a Filament =
Choosing a filament is an important first step when you wish to print something. Below is a basic flow chart to help beginners choose which filament to pick.

[[File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png|800px]]

At Knox Makers, we try to support ABS, PLA, and PETG with our printers, but if you are curious to learn more there are several external sites that give much more detail [https://www.simplify3d.com/resources/materials-guide/properties-table/][https://help.prusa3d.com/materials].

= Step 2: Choose a Printer =
[[File:How To 3D Print - Extrusion - Step 2 - Choose Printer.png|800px]]

= Step 3: Prep Your MacGuffin =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Ender ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Prusa Mk 3 ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

= Step 4: Prep and Print =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Ender ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Prusa Mk 3 ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

= Step 5: Cleanup =
# Remove MacGuffin from Print Bed
# Clean Print Bed
# Unload Filament and Return To Filament Station
# Remove Your Contact Info

Authorization

2025-01-23T19:31:04Z

Rhubarb: /* 3D Printing */

Some of our tools require a safety/authorization course before use. This is required so that everyone who comes to KM has the same level of education on our policies and expectation.

You can find upcoming classes on our Events calendar - https://knoxmakers.org/events

or in the Events channel in Mattermost - https://talk.knoxmakers.org/knoxmakers/channels/events

==Lasercutting==
*CO2 Laser (Moonraker)
*Fiber Laser (Crossbow)

==Electronics==
There are no tools that require authorization in the Electronics zone. If you want help getting started on a tool there, feel free to ask!

==3D Printing==
* Resin Printers

==Fiber Arts==
*Embroidery Machine (Beauty)
*Industrial sewing machine (Beast)
*Sublimation printer (Sublime) and heat press
*Leather sewing machine

Regular sewing machines do not require authorization

==Arts and Crafts==
*Stained Glass area

==Woodworking==
*The entire Zone: Woodworking 101
*Large lathe
*CNC Router

==Machining==
*The entire Zone: Machining 101
*Bridgeport Mill
*Metal Lathe

==Metalworking==
*The entire Zone: Metalworking 101
*Torch cutting

==Blacksmithing==
*The entire Zone: Blacksmithing 101
*Power Hammer (Thumper)
*Torch cutting (housed in blacksmithing but managed by Metalworking)
*Foundry

Authorization

2025-01-23T19:29:36Z

Rhubarb: /* 3D Printing */

Some of our tools require a safety/authorization course before use. This is required so that everyone who comes to KM has the same level of education on our policies and expectation.

You can find upcoming classes on our Events calendar - https://knoxmakers.org/events

or in the Events channel in Mattermost - https://talk.knoxmakers.org/knoxmakers/channels/events

==Lasercutting==
*CO2 Laser (Moonraker)
*Fiber Laser (Crossbow)

==Electronics==
There are no tools that require authorization in the Electronics zone. If you want help getting started on a tool there, feel free to ask!

==3D Printing==
* Resin printers

==Fiber Arts==
*Embroidery Machine (Beauty)
*Industrial sewing machine (Beast)
*Sublimation printer (Sublime) and heat press
*Leather sewing machine

Regular sewing machines do not require authorization

==Arts and Crafts==
*Stained Glass area

==Woodworking==
*The entire Zone: Woodworking 101
*Large lathe
*CNC Router

==Machining==
*The entire Zone: Machining 101
*Bridgeport Mill
*Metal Lathe

==Metalworking==
*The entire Zone: Metalworking 101
*Torch cutting

==Blacksmithing==
*The entire Zone: Blacksmithing 101
*Power Hammer (Thumper)
*Torch cutting (housed in blacksmithing but managed by Metalworking)
*Foundry

3D Printing

2025-01-06T16:13:28Z

Rhubarb: /* Consumables On-Hand (probably) */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Class
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}
If you would like to assist in any of these TODOs, please contact [https://knoxmakers.org/member/david.rusbarsky/ Rhubarb]

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* Our Filament Station (a peg board with various filaments) is located within our zone and provides ABS, PLA, and PETG filaments that are available for our members to use. These filaments shall remain at Knox Makers and should be returned to the Filament Station after a print is completed.
* We have instituted a "Give a Spool, Take a Spool" bin that is located in front of the Filament Station. This blue bin is where people can donate any filament to the zone. The filament found in this bin can be used at Knox Makers or can be brought home for use on your personal printer.

=== Resin ===
* Due to the resin printer being inoperable, the state of our resin is unknown at the moment

= Classes =
* [[3D Printing - How To Print Extrusion Style]]
* Resin Auth - In development!

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2025-01-06T16:03:14Z

Rhubarb: /* Zone TODO List */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Class
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}
If you would like to assist in any of these TODOs, please contact [https://knoxmakers.org/member/david.rusbarsky/ Rhubarb]

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* [[3D Printing - How To Print Extrusion Style]]
* Resin Auth - In development!

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2025-01-06T16:00:04Z

Rhubarb: /* Zone TODO List */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Class
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* [[3D Printing - How To Print Extrusion Style]]
* Resin Auth - In development!

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2025-01-06T15:59:16Z

Rhubarb: /* Zone TODO List */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* [[3D Printing - How To Print Extrusion Style]]
* Resin Auth - In development!

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2025-01-06T15:58:51Z

Rhubarb: /* Classes */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* [[3D Printing - How To Print Extrusion Style]]
* Resin Auth - In development!

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2025-01-06T15:58:10Z

Rhubarb: /* Equipment */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* [[3D Printing - How To Print Extrusion Style]]
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing - How To Print Extrusion Style

2024-12-16T18:06:45Z

Rhubarb: /* Step 5: Cleanup */

This page is meant to give details on how to print using the Extrusion style printers (often referred to as FDM or Fused Deposition Modeling).

= Step 1: Choose a Filament =
[[File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png|800px]]

= Step 2: Choose a Printer =
[[File:How To 3D Print - Extrusion - Step 2 - Choose Printer.png|800px]]

= Step 3: Prep Your MacGuffin =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Ender ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

== Prusa Mk 3 ==
# Import
# Size
# Position
# Orientate
# Tune Filament and Printer Settings
# Add Supports
# Tune Supports
# Output

= Step 4: Prep and Print =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Ender ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

== Prusa Mk 3 ==
# Display Your Contact Info Near Printer (MatterMost username) and Date / Time When You Intend To Return
# Clean Print Bed
# Load Filament
# Load MacGuffin
# Start Print

= Step 5: Cleanup =
# Remove MacGuffin from Print Bed
# Clean Print Bed
# Unload Filament and Return To Filament Station
# Remove Your Contact Info

3D Printing - How To Print Extrusion Style

2024-12-16T18:06:10Z

Rhubarb: /* Step 4: Prep and Print */

3D Printing - How To Print Extrusion Style

2024-12-16T18:05:08Z

Rhubarb: /* Step 3: Prep Your MacGuffin */

3D Printing - How To Print Extrusion Style

2024-12-16T18:04:58Z

Rhubarb: /* XL */

3D Printing - How To Print Extrusion Style

2024-12-16T18:03:15Z

Rhubarb: /* Step 2: Choose a Printer */

File:How To 3D Print - Extrusion - Step 2 - Choose Printer.png

2024-12-16T18:02:51Z

Rhubarb:

Flow chart showing how to choose a printer for 3D printing

3D Printing - How To Print Extrusion Style

2024-12-16T18:02:10Z

Rhubarb: /* Step 1: Choose a Filament */

3D Printing - How To Print Extrusion Style

2024-12-16T17:58:37Z

Rhubarb: /* Step 1: Choose a Filament */

File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png

2024-12-16T17:57:41Z

Rhubarb:

Flow chart showing how to choose a filament for 3D printing

3D Printing - How To Print Extrusion Style

2024-12-16T17:52:09Z

Rhubarb: Created page with "This page is meant to give details on how to print using the Extrusion style printers (often referred to as FDM or Fused Deposition Modeling). = Step 1: Choose a Filament = = Step 2: Choose a Printer = = Step 3: Prep Your MacGuffin = Follow the steps outlined corresponding to your chosen printer (from Step 2) == XL == == Ender == == Prusa Mk 3 == = Step 4: Prep and Print = Follow the steps outlined corresponding to your chosen printer (from Step 2) == XL == == Ender ==..."

This page is meant to give details on how to print using the Extrusion style printers (often referred to as FDM or Fused Deposition Modeling).

= Step 1: Choose a Filament =
= Step 2: Choose a Printer =
= Step 3: Prep Your MacGuffin =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
== Ender ==
== Prusa Mk 3 ==
= Step 4: Prep and Print =
Follow the steps outlined corresponding to your chosen printer (from Step 2)
== XL ==
== Ender ==
== Prusa Mk 3 ==
= Step 5: Cleanup =

3D Printing

2024-12-16T17:46:58Z

Rhubarb: /* Classes */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Not operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* [[3D Printing - How To Print Extrusion Style]]
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-12-16T17:43:25Z

Rhubarb: /* Equipment */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Not operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-03-27T02:05:11Z

Rhubarb: /* Equipment */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Not operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-03-19T22:31:30Z

Rhubarb: /* Equipment */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

Main Page

2024-02-27T03:10:52Z

Rhubarb: /* Functional Areas */ added link to 3D Printing zone's page

__NOTOC__
'''Welcome to the Knox Makers Wiki!'''

''Write Access to this wiki is limited to members.''

=About Knox Makers=

Here is a [[Space History| history of Knox Makers ]]

List of [https://knoxmakers.org/tools/ tools]

Link to [[ Tool Docuentation | Tool Documentation and Manual pdfs ]]

==Members==

[[Membership Rules]] - Here is a place to find the rules that our members are expected to follow.

[[How to Become a Member]] - An overview of the process.

==Functional Areas==
Knox Makers has several distinct areas in our workshop, and each area has an area leader known as a [https://knoxmakers.org/wiki/czar Czar] (or Czarina). The areas and their respective Czars/Czarinas are:
*Hospitality - [https://knoxmakers.org/member/margaret Margaret]
*[[3D Printing]] - [https://knoxmakers.org/member/david.rusbarsky/ Rhubarb]
*Arts & Crafts - [https://knoxmakers.org/member/sean/ Sean]
*[[Electronics]] - [https://knoxmakers.org/member/ray/ Ray]
*[[Fiber Arts]] - [https://knoxmakers.org/member/joslin/ Sue]
*[[Woodworking]] - [https://knoxmakers.org/member/brian-greenh0e/ Brian]
*[[Machining]] - [https://knoxmakers.org/member/billy/ Billy]
*[[Metalworking]] - [https://knoxmakers.org/member/joehall31415/ Joe]
*[[Lasercutting]] - [https://knoxmakers.org/member/jondale Jondale]
*[[Blacksmithing]] - [https://knoxmakers.org/member/andrewm/ Andrew]
*Safety and First Aid - [https://knoxmakers.org/member/tonybaker/ Tony]
*Classroom (including A/V systems, administrative storage and server rack) - [https://knoxmakers.org/board-of-directors/ Board of Directors]
*Rental Bays (including work bays, pallet racks, and long goods storage) - [https://knoxmakers.org/board-of-directors/ Board of Directors]

==Corporate==
[[Vision]] - Our Vision Statement, Mission Statement, and Core Values

[[Board of Directors]] - A list of our current directors and their working items.

[[Bylaws]] - The corporate organization and other major items details are covered here.

[[Officer Duties]] - A description of duties performed by the board of directors.

[[Meeting Minutes|Meeting Minutes]] - Minutes from our monthly board meetings

[[Logo]] - Knox Makers Logo

[[Knox Makers Privacy Policy]] - Privacy Policy

3D Printing

2024-02-27T03:07:38Z

Rhubarb: /* Zone TODO List */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
* Standardize on FDM filament
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-02-27T03:00:59Z

Rhubarb: /* FDM Filament */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===

{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-02-27T03:00:35Z

Rhubarb: /* Equipment */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description

|-
| Operational
||
Prusa Mk3
||
Located in the black metal box. Setup to print ABS, ASA, PETG and PLA.

|-
| Operational
||
Prusa Mk3
||
Located on shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Prusa XL
||
Located on the shelf.

|-
| Operational
||
Ender 3
||
Located on the shelf. Setup to print PETG and PLA.

|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer

|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing

|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament
{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]
* Zone Store stocked with
** Heatset inserts
** Neo Magnets of a variety of sizes
** Small metric nuts and screws

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T23:20:08Z

Rhubarb: /* FDM Filament */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Repair/prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description
|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer
|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing
|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing
|-
|
||

||

|-
|
||

||

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament
{| class="wikitable"
|+Equipment
|-
| Type
|| Color
|| Brand
|| Size
|| Percent of Spool Remaining
|-
| PLA
|| Silk Silver
|| Unknown
|| 1.75mm
|| < 25% of 1kg
|-
| TPU
|| Grey
|| Amazon Basics
|| 1.75mm
|| 100% of 1kg
|-
| PLA
|| Yellow
|| Inland
|| 1.75mm
|| 100% of 1kg

|-
| VillaGlass?
|| Black
|| Vilarox
|| 1.75mm
|| 25% of 1kg
|-
| T-PLA
|| White? Clear?
|| Nature?
|| 1.75mm
|| 75% of 1kg
|-
| PLA
|| Fluo-orange
|| Unknown
|| 1.75mm
|| 50% of 1kg
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||
|-
|
||
||
||
||

|}

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T22:27:56Z

Rhubarb: /* Zone TODO List */

3D Printing

2024-01-30T22:26:38Z

Rhubarb: /* Equipment */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Equipment =
This section is a list of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description
|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer
|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing
|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing
|-
|
||

||

|-
|
||

||

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T22:25:18Z

Rhubarb:

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Equipment =
List of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description
|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer
|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing
|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing
|-
|
||

||

|-
|
||

||

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament

=== Resin ===
* Basic Grey

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T22:17:55Z

Rhubarb: /* Current Equipment */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Current Equipment =
List of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description
|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer
|-
| Operational
||
Mercury X Wash
||
A wash station used in conjunction with resin printing
|-
| Operational
||
Mercury X Cure
||
A cure station used in conjunction with resin printing
|-
|
||

||

|-
|
||

||

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament

=== Resin ===
* Basic Grey

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T22:12:48Z

Rhubarb: /* Current Equipment */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Current Equipment =
List of printers we have, their status (broken/functional), among other equipment of note.

{| class="wikitable"
|+Equipment
|-
| Status || Equipment || Description
|-
| Not operational
||
Elegoo Saturn
||
Medium sized resin printer
|-
| Operational
||

||

|-
| Operational
||

||

|-
|
||

||

|-
|
||

||

|}

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament

=== Resin ===
* Basic Grey

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T21:59:57Z

Rhubarb: /* Wish List */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this]

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Current Equipment =
List of printers we have, their status (broken/functional), among other equipment of note.

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament

=== Resin ===
* Basic Grey

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T21:59:38Z

Rhubarb: /* Wish List */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Wish List =
In no particular order
* Plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this)

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Current Equipment =
List of printers we have, their status (broken/functional), among other equipment of note.

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament

=== Resin ===
* Basic Grey

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T21:57:54Z

Rhubarb: /* FDM */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Wish List =
In no particular order
* plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this)

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Current Equipment =
List of printers we have, their status (broken/functional), among other equipment of note.

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM Filament ===
* ABS Filament

=== Resin ===
* Basic Grey

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T21:57:21Z

Rhubarb: /* Classes */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Wish List =
In no particular order
* plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this)

= Classes =
* FDM Auth - In development!
* Resin Auth - In development!
* FreeCAD - Typically held monthly

= Current Equipment =
List of printers we have, their status (broken/functional), among other equipment of note.

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM ===
* ABS Filament

=== Resin ===
* Basic Grey

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-30T21:55:42Z

Rhubarb: /* Wish List */

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority
||
* FDM Auth Class
* Prepare resin printer for use
||
* Assess large format resin printer
* Purchase resin printer accessories 
* Shelf enclosure for FDMs

|-
| Low Priority
||
* Setup resin zone
* Create resin printer auth class
* Printed Things Store
||
* Purchase UPS or power strip
* Purchase desk
* Purchase rolling table
|}

= Wish List =
In no particular order
* plastic recycler / filament maker
* UPS for FDM area
* UPS for resin area
* Desk
* Rolling work table
* Large format resin printer
** Possibly a [https://github.com/TheContrappostoShop/Prometheus-MSLA Prometheus] or one of [https://all3dp.com/2/diy-resin-3d-printer-sla/ these options]
* Resin printer accessories
** Flex plate
** Extra feps
** Handles
** Splash mats
** Extra gloves
* 3D Scanner
* Delta printer
* SLS powder printer - [https://youtu.be/FZVI3GsgozI possibly this)

= Classes =
* FDM Auth
* Resin Auth
* FreeCAD

= Current Equipment =
List of printers we have, their status (broken/functional), among other equipment of note.

* https://wiki.knoxmakers.org/Tool_Documentation#3D_printing_&_scanning_zone

= Consumables On-Hand (probably) =

=== FDM ===
* ABS Filament

=== Resin ===
* Basic Grey

= Software =
* Octoprint
* Prusa slicer

= Legacy Links =

3D Printing

2024-01-26T23:42:33Z

Rhubarb: /* Wish List */

3D Printing

2024-01-26T23:41:10Z

Rhubarb: /* Current Equipment */

3D Printing

2024-01-26T23:38:47Z

Rhubarb: /* Current Equipment */

3D Printing

2024-01-26T23:37:22Z

Rhubarb: /* Current Equipment */

3D Printing

2024-01-26T23:26:04Z

Rhubarb: /* Zone TODO List */

3D Printing

2024-01-26T23:24:59Z

Rhubarb: /* Zone TODO List */

3D Printing

2024-01-26T23:06:06Z

Rhubarb: Created page with "= Zone TODO List = {| class="wikitable" |+TODO |- | || Now || Later |- | High Priority || || |- | Low Priority || || |}"

= Zone TODO List =
{| class="wikitable"
|+TODO
|-
| || Now || Later
|-
| High Priority || ||
|-
| Low Priority || ||
|}