COVID19 Response - Revision history

Amos: /* Files */

2020-08-12T15:43:20Z

Files

← Older revision		Revision as of 15:43, 12 August 2020
Line 35:		Line 35:
	\|'''3D Printed Part'''		\|'''3D Printed Part'''
	\|		\|
	~~Single~~ (~~stl~~):		Prusa Pro/RC4 for newer builds:
	[[Media:Prusa RC3 PETG single.stl\|PETG]],		:[[Media:Prusa PRO 1x2.stl\|PLA 1x2]],
	[[Media:Prusa RC3 ABS single.stl\|ABS]],
	[[Media:Prusa RC3 ASA single.stl\|ASA]],		RC3 (kept for '''legacy''' support reasons: you probably want the above files instead) Single in a variety of materials:
	[[Media:Prusa RC3 PC single.stl\|PC]],		:[[Media:Prusa RC3 PETG single.stl\|PETG]],
	[[Media:Prusa RC3 PLA single.stl\|PLA]],		:[[Media:Prusa RC3 ABS single.stl\|ABS]],
	[[Media:Prusa RC3 Nylon single.stl\|Nylon]]		:[[Media:Prusa RC3 ASA single.stl\|ASA]],
			:[[Media:Prusa RC3 PC single.stl\|PC]],
			:[[Media:Prusa RC3 PLA single.stl\|PLA]],
			:[[Media:Prusa RC3 Nylon single.stl\|Nylon]]

			RC3 (kept for '''legacy''' support reasons: you probably want the above files instead) PLA stacks:
			:[[Media:Prusa RC3 PLA 1x2.stl\|2]],
			:[[Media:Prusa RC3 PLA 1x3.stl\|3]],
			:[[Media:Prusa RC3 PLA 1x4.stl\|4]],
			:[[Media:Prusa RC3 PLA 1x5.stl\|5]],
			:[[Media:Prusa RC3 PLA 1x6.stl\|6]],
			:[[Media:Prusa RC3 PLA 1x7.stl\|7]],
			:[[Media:Prusa RC3 PLA 1x8.stl\|8]]

	~~PLA stacks:~~
	~~[[Media:Prusa PRO 1x2.stl\|2]],~~
	~~[[Media:Prusa RC3 PLA 1x3.stl\|3]],~~
	~~[[Media:Prusa RC3 PLA 1x4.stl\|4]],~~
	~~[[Media:Prusa RC3 PLA 1x5.stl\|5]],~~
	~~[[Media:Prusa RC3 PLA 1x6.stl\|6]],~~
	~~[[Media:Prusa RC3 PLA 1x7.stl\|7]],~~
	~~[[Media:Prusa RC3 PLA 1x8.stl\|8]]~~

	\|-		\|-

Amos: /* Files */

2020-08-12T15:35:17Z

Files

← Older revision		Revision as of 15:35, 12 August 2020
Line 44:		Line 44:

	PLA stacks:		PLA stacks:
	[[Media:Prusa ~~RC3 PLA~~ 1x2.stl\|2]],		[[Media:Prusa PRO 1x2.stl\|2]],
	[[Media:Prusa RC3 PLA 1x3.stl\|3]],		[[Media:Prusa RC3 PLA 1x3.stl\|3]],
	[[Media:Prusa RC3 PLA 1x4.stl\|4]],		[[Media:Prusa RC3 PLA 1x4.stl\|4]],

Jondale at 17:01, 27 April 2020

2020-04-27T17:01:39Z

← Older revision		Revision as of 17:01, 27 April 2020
Line 6:		Line 6:
	== Face Shields ==		== Face Shields ==

	A face shield to be worn by medical workers. Our design is based on the Prusa Face Shield with alterations made in response to feedback from UT Emergency Department. It involves a 3d printed part printed part, a laser cut part, and button hole elastic.		A face shield to be worn by medical workers.

			Our design is based on the Prusa Face Shield with alterations made in response to feedback from UT Emergency Department.

			It involves a 3d printed part printed part, a laser cut part, and button hole elastic.

	[[File:Face shields build1.JPG\|600px]]		[[File:Face shields build1.JPG\|600px]]
Line 52:		Line 56:

	== Bias Tape Makers ==		== Bias Tape Makers ==
	Bias tape makers help make the pleats in the fabric masks. They can be 3d printed and are helpful to the community making these masks.		Bias tape makers help make the pleats in the fabric masks.

			They can be 3d printed and are helpful to the community making these masks.

	[[File:bias_tape_maker.JPG\|600px]]		[[File:bias_tape_maker.JPG\|600px]]
Line 67:		Line 73:

	== Fabric Masks ==		== Fabric Masks ==
	~~More info soon~~		Fabric masks are meant to protect from the spread of droplets from the wearer's mouth and nose.

			These are currently being recommended for everyone and not just health workers.

			[[File:fabric-masks.jpg\|600px]]


	== Surgical Mask Straps ==		== Surgical Mask Straps ==
	The surgical mask straps hold the elastic that normally is held by a health worker's ears. It helps save the irritation caused by prolonged usage~~. These can be 3d printed~~.		The surgical mask straps hold the elastic that normally is held by a health worker's ears.

			It helps save the irritation caused by prolonged usage.

	[[File:mask_straps.JPG\|600px]]		[[File:mask_straps.JPG\|600px]]

Jondale at 02:02, 27 April 2020

2020-04-27T02:02:36Z

← Older revision		Revision as of 02:02, 27 April 2020
Line 2:		Line 2:
	Knox Makers is organizing efforts to create and provide protective equipment and support to our local health community.		Knox Makers is organizing efforts to create and provide protective equipment and support to our local health community.

	~~== Files ==~~

	~~{\| class='wikitable'~~
	~~\| style="width:150px;"\|'''Face Shields'''~~
	~~\| style="width:600px;"\|~~

	~~{\| class='wikitable'~~
	~~\| style="width:150px;"\|Laser Part~~
	~~\| style="width:400px;"\|[[Media:Km_faceshield_laser.svg\|svg]]~~
	\|-
	~~\|3D Printed Part~~
	\|
	~~Single (stl):~~
	~~[[Media:Prusa RC3 PETG single.stl\|PETG]],~~
	~~[[Media:Prusa RC3 ABS single.stl\|ABS]],~~
	~~[[Media:Prusa RC3 ASA single.stl\|ASA]],~~
	~~[[Media:Prusa RC3 PC single.stl\|PC]],~~
	~~[[Media:Prusa RC3 PLA single.stl\|PLA]],~~
	~~[[Media:Prusa RC3 Nylon single.stl\|Nylon]]~~

	~~PLA stacks:~~
	~~[[Media:Prusa RC3 PLA 1x2.stl\|2]],~~
	~~[[Media:Prusa RC3 PLA 1x3.stl\|3]],~~
	~~[[Media:Prusa RC3 PLA 1x4.stl\|4]],~~
	~~[[Media:Prusa RC3 PLA 1x5.stl\|5]],~~
	~~[[Media:Prusa RC3 PLA 1x6.stl\|6]],~~
	~~[[Media:Prusa RC3 PLA 1x7.stl\|7]],~~
	~~[[Media:Prusa RC3 PLA 1x8.stl\|8]]~~

	\|-
	\|}

	\|-
	~~\|'''Bias Tape Makers'''~~
	~~\|[[Media:5cmBiasTape Q2 wings.stl\|5cm (wings)]], [[Media:5cmBiasTape Q2.stl\|5cm]], [[Media:4cmBiasTape Q3 fold U wings.stl\|4cm (wings)]], [[Media:4cmBiasTape Q2.stl\|4cm]]~~
	\|-
	~~\|'''Surgical Mask Straps'''~~
	~~\| [[Media:Surgical Mask Strap Remix.stl\|Suraky's Remix]] (stl)~~
	\|-
	\|}

	== Face Shields ==		== Face Shields ==

Jondale: /* Files */

2020-04-27T00:04:24Z

Files

← Older revision		Revision as of 00:04, 27 April 2020
Line 65:		Line 65:

	{\| class='wikitable'		{\| class='wikitable'
	\| style="width:150px;"\|Laser Part		\| style="width:150px;"\|'''Laser Part'''
	\| style="width:400px;"\|[[Media:Km_faceshield_laser.svg\|svg]]		\| style="width:400px;"\|[[Media:Km_faceshield_laser.svg\|svg]]
	\|-		\|-
	\|3D Printed Part		\|'''3D Printed Part'''
	\|		\|
	Single (stl):		Single (stl):

Jondale: /* Surgical Mask Straps */

2020-04-27T00:03:25Z

Surgical Mask Straps

← Older revision		Revision as of 00:03, 27 April 2020
Line 113:		Line 113:

	[[File:mask_straps.JPG\|600px]]		[[File:mask_straps.JPG\|600px]]

			=== Files ===

			[[Media:Surgical Mask Strap Remix.stl\|Suraky's Remix]] (stl)

Jondale: /* Bias Tape Makers */

2020-04-27T00:02:52Z

Bias Tape Makers

← Older revision		Revision as of 00:02, 27 April 2020
Line 94:		Line 94:

	[[File:bias_tape_maker.JPG\|600px]]		[[File:bias_tape_maker.JPG\|600px]]

			=== Files ===

			[[Media:5cmBiasTape Q2 wings.stl\|5cm (wings)]] (stl)

			[[Media:5cmBiasTape Q2.stl\|5cm]] (stl)

			[[Media:4cmBiasTape Q3 fold U wings.stl\|4cm (wings)]] (stl)

			[[Media:4cmBiasTape Q2.stl\|4cm]] (stl)

	== Fabric Masks ==		== Fabric Masks ==

Jondale: /* Face Shields */

2020-04-27T00:00:49Z

Face Shields

← Older revision		Revision as of 00:00, 27 April 2020
Line 61:		Line 61:

	[[COVID19_Response_3D_Suggestions\|Page for 3D printing suggestions]]		[[COVID19_Response_3D_Suggestions\|Page for 3D printing suggestions]]

			=== Files ===

			{\| class='wikitable'
			\| style="width:150px;"\|Laser Part
			\| style="width:400px;"\|[[Media:Km_faceshield_laser.svg\|svg]]
			\|-
			\|3D Printed Part
			\|
			Single (stl):
			[[Media:Prusa RC3 PETG single.stl\|PETG]],
			[[Media:Prusa RC3 ABS single.stl\|ABS]],
			[[Media:Prusa RC3 ASA single.stl\|ASA]],
			[[Media:Prusa RC3 PC single.stl\|PC]],
			[[Media:Prusa RC3 PLA single.stl\|PLA]],
			[[Media:Prusa RC3 Nylon single.stl\|Nylon]]

			PLA stacks:
			[[Media:Prusa RC3 PLA 1x2.stl\|2]],
			[[Media:Prusa RC3 PLA 1x3.stl\|3]],
			[[Media:Prusa RC3 PLA 1x4.stl\|4]],
			[[Media:Prusa RC3 PLA 1x5.stl\|5]],
			[[Media:Prusa RC3 PLA 1x6.stl\|6]],
			[[Media:Prusa RC3 PLA 1x7.stl\|7]],
			[[Media:Prusa RC3 PLA 1x8.stl\|8]]

			\|-
			\|}

	== Bias Tape Makers ==		== Bias Tape Makers ==

Jondale: /* Bias Tape Makers */

2020-04-26T23:59:04Z

Bias Tape Makers

← Older revision		Revision as of 23:59, 26 April 2020
Line 65:		Line 65:
	Bias tape makers help make the pleats in the fabric masks. They can be 3d printed and are helpful to the community making these masks.		Bias tape makers help make the pleats in the fabric masks. They can be 3d printed and are helpful to the community making these masks.

			[[File:bias_tape_maker.JPG\|600px]]

	== Fabric Masks ==		== Fabric Masks ==

Jondale: /* Surgical Mask Straps */

2020-04-26T23:55:27Z

Surgical Mask Straps

← Older revision		Revision as of 23:55, 26 April 2020
Line 72:		Line 72:
	== Surgical Mask Straps ==		== Surgical Mask Straps ==
	The surgical mask straps hold the elastic that normally is held by a health worker's ears. It helps save the irritation caused by prolonged usage. These can be 3d printed.		The surgical mask straps hold the elastic that normally is held by a health worker's ears. It helps save the irritation caused by prolonged usage. These can be 3d printed.

			[[File:mask_straps.JPG\|600px]]

← Older revision		Revision as of 15:43, 12 August 2020
Line 35:		Line 35:
	\|'''3D Printed Part'''		\|'''3D Printed Part'''
	\|		\|
	~~Single~~ (~~stl~~):		Prusa Pro/RC4 for newer builds:
	[[Media:Prusa RC3 PETG single.stl\|PETG]],		:[[Media:Prusa PRO 1x2.stl\|PLA 1x2]],
	[[Media:Prusa RC3 ABS single.stl\|ABS]],
	[[Media:Prusa RC3 ASA single.stl\|ASA]],		RC3 (kept for '''legacy''' support reasons: you probably want the above files instead) Single in a variety of materials:
	[[Media:Prusa RC3 PC single.stl\|PC]],		:[[Media:Prusa RC3 PETG single.stl\|PETG]],
	[[Media:Prusa RC3 PLA single.stl\|PLA]],		:[[Media:Prusa RC3 ABS single.stl\|ABS]],
	[[Media:Prusa RC3 Nylon single.stl\|Nylon]]		:[[Media:Prusa RC3 ASA single.stl\|ASA]],
			:[[Media:Prusa RC3 PC single.stl\|PC]],
			:[[Media:Prusa RC3 PLA single.stl\|PLA]],
			:[[Media:Prusa RC3 Nylon single.stl\|Nylon]]

			RC3 (kept for '''legacy''' support reasons: you probably want the above files instead) PLA stacks:
			:[[Media:Prusa RC3 PLA 1x2.stl\|2]],
			:[[Media:Prusa RC3 PLA 1x3.stl\|3]],
			:[[Media:Prusa RC3 PLA 1x4.stl\|4]],
			:[[Media:Prusa RC3 PLA 1x5.stl\|5]],
			:[[Media:Prusa RC3 PLA 1x6.stl\|6]],
			:[[Media:Prusa RC3 PLA 1x7.stl\|7]],
			:[[Media:Prusa RC3 PLA 1x8.stl\|8]]

	~~PLA stacks:~~
	~~[[Media:Prusa PRO 1x2.stl\|2]],~~
	~~[[Media:Prusa RC3 PLA 1x3.stl\|3]],~~
	~~[[Media:Prusa RC3 PLA 1x4.stl\|4]],~~
	~~[[Media:Prusa RC3 PLA 1x5.stl\|5]],~~
	~~[[Media:Prusa RC3 PLA 1x6.stl\|6]],~~
	~~[[Media:Prusa RC3 PLA 1x7.stl\|7]],~~
	~~[[Media:Prusa RC3 PLA 1x8.stl\|8]]~~

	\|-		\|-

← Older revision		Revision as of 02:02, 27 April 2020
Line 2:		Line 2:
	Knox Makers is organizing efforts to create and provide protective equipment and support to our local health community.		Knox Makers is organizing efforts to create and provide protective equipment and support to our local health community.

	~~== Files ==~~

	~~{\| class='wikitable'~~
	~~\| style="width:150px;"\|'''Face Shields'''~~
	~~\| style="width:600px;"\|~~

	~~{\| class='wikitable'~~
	~~\| style="width:150px;"\|Laser Part~~
	~~\| style="width:400px;"\|[[Media:Km_faceshield_laser.svg\|svg]]~~
	\|-
	~~\|3D Printed Part~~
	\|
	~~Single (stl):~~
	~~[[Media:Prusa RC3 PETG single.stl\|PETG]],~~
	~~[[Media:Prusa RC3 ABS single.stl\|ABS]],~~
	~~[[Media:Prusa RC3 ASA single.stl\|ASA]],~~
	~~[[Media:Prusa RC3 PC single.stl\|PC]],~~
	~~[[Media:Prusa RC3 PLA single.stl\|PLA]],~~
	~~[[Media:Prusa RC3 Nylon single.stl\|Nylon]]~~

	~~PLA stacks:~~
	~~[[Media:Prusa RC3 PLA 1x2.stl\|2]],~~
	~~[[Media:Prusa RC3 PLA 1x3.stl\|3]],~~
	~~[[Media:Prusa RC3 PLA 1x4.stl\|4]],~~
	~~[[Media:Prusa RC3 PLA 1x5.stl\|5]],~~
	~~[[Media:Prusa RC3 PLA 1x6.stl\|6]],~~
	~~[[Media:Prusa RC3 PLA 1x7.stl\|7]],~~
	~~[[Media:Prusa RC3 PLA 1x8.stl\|8]]~~

	\|-
	\|}

	\|-
	~~\|'''Bias Tape Makers'''~~
	~~\|[[Media:5cmBiasTape Q2 wings.stl\|5cm (wings)]], [[Media:5cmBiasTape Q2.stl\|5cm]], [[Media:4cmBiasTape Q3 fold U wings.stl\|4cm (wings)]], [[Media:4cmBiasTape Q2.stl\|4cm]]~~
	\|-
	~~\|'''Surgical Mask Straps'''~~
	~~\| [[Media:Surgical Mask Strap Remix.stl\|Suraky's Remix]] (stl)~~
	\|-
	\|}

	== Face Shields ==		== Face Shields ==

← Older revision		Revision as of 00:00, 27 April 2020
Line 61:		Line 61:

	[[COVID19_Response_3D_Suggestions\|Page for 3D printing suggestions]]		[[COVID19_Response_3D_Suggestions\|Page for 3D printing suggestions]]

			=== Files ===

			{\| class='wikitable'
			\| style="width:150px;"\|Laser Part
			\| style="width:400px;"\|[[Media:Km_faceshield_laser.svg\|svg]]
			\|-
			\|3D Printed Part
			\|
			Single (stl):
			[[Media:Prusa RC3 PETG single.stl\|PETG]],
			[[Media:Prusa RC3 ABS single.stl\|ABS]],
			[[Media:Prusa RC3 ASA single.stl\|ASA]],
			[[Media:Prusa RC3 PC single.stl\|PC]],
			[[Media:Prusa RC3 PLA single.stl\|PLA]],
			[[Media:Prusa RC3 Nylon single.stl\|Nylon]]

			PLA stacks:
			[[Media:Prusa RC3 PLA 1x2.stl\|2]],
			[[Media:Prusa RC3 PLA 1x3.stl\|3]],
			[[Media:Prusa RC3 PLA 1x4.stl\|4]],
			[[Media:Prusa RC3 PLA 1x5.stl\|5]],
			[[Media:Prusa RC3 PLA 1x6.stl\|6]],
			[[Media:Prusa RC3 PLA 1x7.stl\|7]],
			[[Media:Prusa RC3 PLA 1x8.stl\|8]]

			\|-
			\|}

	== Bias Tape Makers ==		== Bias Tape Makers ==