New Space To Do: Difference between revisions

From Knox Makers Wiki
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
==Break Area==
==Break Area==
*<s>Replace burned-out 4' lamps</s>
*Take out recycling
*<s>clean up 8' table</s>
*<s>find home for microwave</s>
* <s>do we get rid of coffee equipment?  Hasn't been used in years </s>  Find a home for coffee stuff.
* <s>reduce shelving density in small shelves by entrance</s>
*Add signage to space doors about alarm and police.
*Add signage to space doors about alarm and police.


==Metalworking Area==
==Metalworking Area==
*Coordinate with PCB Rob to bring in additional equipment.
*Coordinate with PCB Rob to bring in additional equipment.
* <s>Design</s> Rob has welding table design from online - build welding table
*Rob has welding table design from online - build welding table
* <s>Unpack remaining items/tooling for milling/lathe </s> - Thank Gabe
*design filtration system
*design <s>ventilation</s> filtration system
*label metalworking shelving - and organize
*label metalworking shelving - and organize
*figure out what metal screws are needed in radioshack cabinet.  What should we stock?
*figure out what metal screws are needed in radioshack cabinet.  What should we stock?
*<s>Move old woodworking shelf as temporary material storage</s>
*Rotate old wooden storage for metalworking
*design/build new metal material storage rack (low priority, use old wood rack for now)
*design/build new metal material storage rack (low priority, use old wood rack for now)
*<s>put feet on temporary metal storage rack</s>
*add new circuits for tools
*<s>paint wall above welding area flat black</s>


==Woodworking Area==
==Woodworking Area==
*unpack/organize hand tools
*unpack/organize hand tools
*<s>design</s>/build stand for drill press
*build stand for drill press
*<s>design/build wood storage</s>
*<s>design dust collection system</s> Now ordered.
*label hack-rack in woodworking area
*label hack-rack in woodworking area
*label woodworking tool storage
*label woodworking tool storage
*figure out what wood screws are needed in radioshack cabinet.  What should we stock?
*figure out what wood screws are needed in radioshack cabinet.  What should we stock?
*<s>design/build outfeed table for tablesaw</s>
*Finish outfeed table for tablesaw
*<s>design/build</s> finish new base for planer
*finish new base for planer
*<s>center up light over storage area</s>
*add new circuits for tools
 


==Arts/Crafts==
==Arts/Crafts==
* <s>unpack boxes and relocate to shoebox bins (nothing should remain on member storage shelves) </s> Thanks Joe!
*build sewing table with storage for sewing machines and supplies
*<s>design/</s>build sewing table with storage for sewing machines and supplies
*what should 4th table be?  Another work table? another sewing table?  Leatherworking/other?
*Replace table-tops for work tables.  LDPE $51 each @ piedmont plastics.


==Electronics==
*<s>unpack items and sort into shoebox bins - Partially finished</s>
*<s>find home for radioshack shelves </s> <s>One bin remaining.  Good use for it?</s>


==Classroom==
==Classroom==
*<s>locate and mount projector screens</s>
*add new electrical
*locate and mount projector<s>(s)</s>
 
*unstack chairs
==Electronics==
*<s>attach tabletop to table</s>
*add new circuit
*relocate track lighting
*<s>paint rear wall in space monochrome color to not look shabby</s>


==General==
==General==
*<s>repair light fixture on arts/crafts table.  Ends fixed, needs new ballast. </s>
*<s>relocate lighting on front table </s>
*<s>relocate lighting in arts/crafts area to one per table (four tables by design) - Partially finished</s>
*relocate lighting in classroom (after projector/screen location)
*<s>set up wireless network (do we have the appropriate routers for what we need?)</s>
*get tools working on network again (3d printer/laser cutter)
*get tools working on network again (3d printer/laser cutter)
*<s>add sign to network?</s>
*hang up laser cut gear board
*hang posters/signs/other decorations
*use new modem for wireless?
*use new modem for wireless?
*add printer to network
*break down cardboard boxes and take to recycling
*break down cardboard boxes
*unload extra shelf parts
*load up extra shelf parts and put in storage
*Add new circuit and hang emergency lighting
*repair air compressor cart


==Non-specific==
==Non-specific==
*Lasercut/Magnetic member storage signs?   
*Lasercut/Magnetic member storage signs?   
*make signs for member storage area that indicate storage on top of shelves not permitted
*<s>design 3D printable part that can be used as divider in radioshack cabinets</s> Maybe just use boxes with flat dividers, rather than labeled dividers.
*<s>design 3D printable part that can be used as divider in radioshack cabinets</s> Maybe just use boxes with flat dividers, rather than labeled dividers.
==Closing out Old Space==
*Perform final walk-thru and give keys to Pat from City of Oak Ridge
*<s>Put in Change of Address with Post Office</s>
*<s>Clean final items out of old space</s>
*<s>Stop service with ORUD Gas</s>
*<s>Put in basic repair work to have best chance of getting deposit back after final inspection</s>
*<s>Cancel or put in Stop Payment on Tech 2020 Internet Service auto ACH withdrawal</s>
*<s>Schedule final inspection with City of Oak Ridge</s>
*<s>Post pics of final items in Member Storage and give folks deadline to claim before anything remaining is tossed</s>
*<s>Stop service with City of Oak Ridge Utilities</s>

Revision as of 12:54, 23 June 2016

Break Area

  • Take out recycling
  • Add signage to space doors about alarm and police.

Metalworking Area

  • Coordinate with PCB Rob to bring in additional equipment.
  • Rob has welding table design from online - build welding table
  • design filtration system
  • label metalworking shelving - and organize
  • figure out what metal screws are needed in radioshack cabinet. What should we stock?
  • Rotate old wooden storage for metalworking
  • design/build new metal material storage rack (low priority, use old wood rack for now)
  • add new circuits for tools

Woodworking Area

  • unpack/organize hand tools
  • build stand for drill press
  • label hack-rack in woodworking area
  • label woodworking tool storage
  • figure out what wood screws are needed in radioshack cabinet. What should we stock?
  • Finish outfeed table for tablesaw
  • finish new base for planer
  • add new circuits for tools


Arts/Crafts

  • build sewing table with storage for sewing machines and supplies


Classroom

  • add new electrical

Electronics

  • add new circuit

General

  • get tools working on network again (3d printer/laser cutter)
  • hang up laser cut gear board
  • use new modem for wireless?
  • break down cardboard boxes and take to recycling
  • unload extra shelf parts
  • Add new circuit and hang emergency lighting

Non-specific

  • Lasercut/Magnetic member storage signs?
  • design 3D printable part that can be used as divider in radioshack cabinets Maybe just use boxes with flat dividers, rather than labeled dividers.
Retrieved from "https://wiki.knoxmakers.org/index.php?title=New_Space_To_Do&oldid=2468"