COVID19 Response 3D Suggestions: Difference between revisions
From Knox Makers Wiki
Created page with "== Suggested Print Settings for Face Shields == {| class="wikitable" |- ! Setting !! |- | Wall thickness || 1.2mm |- | Layer height || 0.2-0.3mm |- | Infill density || 30% |-..." |
(No difference)
|
Latest revision as of 00:39, 15 April 2020
Suggested Print Settings for Face Shields
| Setting | |
|---|---|
| Wall thickness | 1.2mm |
| Layer height | 0.2-0.3mm |
| Infill density | 30% |
| Speed | As fast as stable |
Really fast settings for Cura with PETG
