Nibblerbot/tools/tool 16: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Nibblerbot/tools|Back to Tool Library]] | [[Nibblerbot/tools|Back to Tool Library]] | ||
==Tool 16 - 1/4" | ==Tool 16 - 1/4" 2FL COMP End Mill ASTRA 1.000 loc 2.500 oal== | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 9: | Line 9: | ||
|- | |- | ||
| '''Tool Type''' || Compression End Mill | | '''Tool Type''' || Compression End Mill | ||
|- | |||
| '''Shank Size''' || 1/4 in | |||
|- | |||
| '''Diameter''' || 1/4 in | |||
|- | |- | ||
| '''Flutes (FL)''' || 2 | | '''Flutes (FL)''' || 2 | ||
|- | |- | ||
| '''Overall Length (OAL)''' || 2. | | '''Overall Length (OAL)''' || 2.5000" | ||
|- | |- | ||
| '''Length of Cut (LOC)''' || 1. | | '''Length of Cut (LOC)''' || 1.0000" | ||
|- | |- | ||
| '''Max RPM''' || 24,000 | | '''Max RPM''' || 24,000 | ||
|- | |- | ||
| '''Material''' || Carbide | | '''Material''' || Carbide | ||
Revision as of 08:55, 17 December 2024
Tool 16 - 1/4" 2FL COMP End Mill ASTRA 1.000 loc 2.500 oal
| Attribute | Details |
|---|---|
| Tool # | 16 |
| Tool Type | Compression End Mill |
| Shank Size | 1/4 in |
| Diameter | 1/4 in |
| Flutes (FL) | 2 |
| Overall Length (OAL) | 2.5000" |
| Length of Cut (LOC) | 1.0000" |
| Max RPM | 24,000 |
| Material | Carbide |
| Coating | AstraHP |
| Part Number | 425-CM250 |
| Manufacturer | Bits & Bits |
| Image |  |
| Order Link | [Click here to purchase this tool] |
Usage Information
Compatible Materials: Plywood, MDF, Hardwood.
Recommended Speeds and Feeds:
RPM: N/A Feed Rate: N/A Depth of Cut: N/A
Additional Notes
N/A