Nibblerbot/tools/tool 99: Difference between revisions

Revision as of 04:47, 21 December 2024

Attribute	Details
Tool #	99
Tool Type	Touch Probe
Shank Size	6mm
Diameter	N/A
Flutes (FL)	N/A
Overall Length (OAL)	3.6764"
Length of Cut (LOC)	3.6764"
Max RPM	0
Material	2mm
Coating	Carbide
Part Number	N/A
Manufacturer	0
Image
Order Link	B0CC5BFFZW Click here to purchase this tool

Compatible Materials: PGFUN

Recommended Speeds and Feeds:

RPM: https://www.amazon.com/dp/B0CC5BFFZW
Feed Rate: 2 ipm slow feed rate / 50 ipm fast feed rate
Depth of Cut: N/A

Additional probe stylus are available in the toolbox. The steel 2mm Ø is installed and probe is calibrated. Do not change the stylus without checking with Czar or Deputy Czar
This is the Normally closed NPN version of the probe. Transistor circuit needed to work with MESA 7i76e
Has a USB-C to 1/8" TSR connector.
Will show as tipped if the USB-C is not plugged into the probe.
Do not exceed 50ipm rapid with probe.

@@ Line 20: / Line 20: @@
 | '''Length of Cut (LOC)''' || 3.6764"
 |-
-| '''Max RPM''' || N/A
+| '''Max RPM''' || 0
 |-
-| '''Material''' || N/A
+| '''Material''' || 2mm
 |-
 | '''Coating''' || Carbide
 |-
-| '''Part Number''' || Carbide
+| '''Part Number''' || N/A
 |-
-| '''Manufacturer''' || https://www.amazon.com/dp/B0CC5BFFZW
+| '''Manufacturer''' || 0
 |-
 | '''Image''' || [[File:tool_99.png|frameless|left]]
 |-
-| '''Order Link''' || [[N/A Click here to purchase this tool]]
+| '''Order Link''' || [[B0CC5BFFZW Click here to purchase this tool]]
 |}
 ==Usage Information==
-'''Compatible Materials''': 0
+'''Compatible Materials''': PGFUN
 '''Recommended Speeds and Feeds''':
-  '''RPM''': B0CC5BFFZW
+  '''RPM''': https://www.amazon.com/dp/B0CC5BFFZW
   '''Feed Rate''': 2 ipm slow feed rate / 50 ipm fast feed rate
-  '''Depth of Cut''': PGFUN
+  '''Depth of Cut''': N/A
 ==Additional Notes==