Nibblerbot/tools/tool 99: Difference between revisions
From Knox Makers Wiki
No edit summary |
|||
| (25 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Tool 99 - Wired Touch Probe == | |||
[[Nibblerbot/tools|Back to Tool Library]] | |||
==Tool 99 - Wired Touch Probe== | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 7: | Line 9: | ||
|- | |- | ||
| '''Tool Type''' || Touch Probe | | '''Tool Type''' || Touch Probe | ||
|- | |||
| '''Shank Size''' || 6.000 mm | |||
|- | |||
| '''Diameter''' || 2.000 mm | |||
|- | |- | ||
| '''Flutes (FL)''' || N/A | | '''Flutes (FL)''' || N/A | ||
|- | |- | ||
| '''Overall Length (OAL)''' || | | '''Overall Length (OAL)''' || 3.6764" | ||
|- | |- | ||
| '''Length of Cut (LOC)''' || | | '''Length of Cut (LOC)''' || 3.6764" | ||
|- | |- | ||
| ''' | | '''Max RPM''' || N/A | ||
|- | |- | ||
| '''Material''' || | | '''Material''' || Carbide | ||
|- | |- | ||
| '''Coating''' || N/A | | '''Coating''' || N/A | ||
|- | |||
| '''Part Number''' || B0CC5BFFZW | |||
|- | |- | ||
| '''Manufacturer''' || PGFUN | | '''Manufacturer''' || PGFUN | ||
|- | |- | ||
| '''Image | | '''Image''' || [[File:tool_99.png|thumb|left]] | ||
[[File: | |||
|- | |- | ||
| '''Order Link''' || [[https://www.amazon.com/ | | '''Order Link''' || [[https://www.amazon.com/dp/B0CC5BFFZW Click here to purchase this tool]] | ||
|} | |} | ||
==Usage Information== | ==Usage Information== | ||
'''Compatible Materials''': N/A | |||
'''Recommended Speeds and Feeds''': | |||
'''RPM''': 0 | |||
'''Feed Rate''': 2 ipm slow feed rate / 50 ipm fast feed rate | |||
'''Depth of Cut''': N/A | |||
==Additional Notes== | ==Additional Notes== | ||
*Additional probe stylus are available in the toolbox. The steel 2mm Ø is installed and probe is calibrated. Do not change the stylus without checking with Czar or Deputy Czar | *Additional probe stylus are available in the toolbox. The steel 2mm Ø is installed and probe is calibrated. Do not change the stylus without checking with Czar or Deputy Czar | ||
*This is the Normally closed NPN version of the probe. Transistor circuit needed to work with MESA 7i76e | |||
*Has a USB-C to 1/8" TSR connector. | |||
*Will show as tipped if the USB-C is not plugged into the probe. | |||
*Do not exceed 50ipm rapid with probe. | |||
Latest revision as of 20:53, 28 July 2025
Tool 99 - Wired Touch Probe
| Attribute | Details |
|---|---|
| Tool # | 99 |
| Tool Type | Touch Probe |
| Shank Size | 6.000 mm |
| Diameter | 2.000 mm |
| Flutes (FL) | N/A |
| Overall Length (OAL) | 3.6764" |
| Length of Cut (LOC) | 3.6764" |
| Max RPM | N/A |
| Material | Carbide |
| Coating | N/A |
| Part Number | B0CC5BFFZW |
| Manufacturer | PGFUN |
| Image |  |
| Order Link | [Click here to purchase this tool] |
Usage Information
Compatible Materials: N/A
Recommended Speeds and Feeds:
RPM: 0 Feed Rate: 2 ipm slow feed rate / 50 ipm fast feed rate Depth of Cut: N/A
Additional Notes
- Additional probe stylus are available in the toolbox. The steel 2mm Ø is installed and probe is calibrated. Do not change the stylus without checking with Czar or Deputy Czar
- This is the Normally closed NPN version of the probe. Transistor circuit needed to work with MESA 7i76e
- Has a USB-C to 1/8" TSR connector.
- Will show as tipped if the USB-C is not plugged into the probe.
- Do not exceed 50ipm rapid with probe.
