Cardboard Build Resources: Difference between revisions

From Knox Makers Wiki
← Older edit
VisualWikitext
No edit summary
m Updated link to vertical spinner new file.
 
(4 intermediate revisions by the same user not shown)
Line 8: Line 8:
|-
|-
|Basic rectangular Vertical Spinner
|Basic rectangular Vertical Spinner
|[https://cloud.knoxmakers.org/s/nTiqpMEXHxt2nyc .svg file]
|[https://cloud.knoxmakers.org/s/jRYpkBkxwzMWTaK .svg file]
|
|
|Fully editable in Inkscape, this file should contain everything you need to laser all the necessary cardboard and baltic birch to complete a full, basic cardboard robot. This was designed around the hardware recommended in the wiki.
|Fully editable in Inkscape, this file should contain everything you need to laser all the necessary cardboard and baltic birch to complete a full, basic cardboard robot. This was designed around the hardware recommended in the wiki.
<nowiki>**</nowiki> Some batteries may be a tight fit in the battery bay, I'd suggest putting a ribbon or similar under the battery to facilitate easy removal if this is the case for you.
|[[File:Cardbot 1 VS.png|thumb|123x123px]]
|[[File:Cardbot 1 VS.png|thumb|123x123px]]
|}
|}


== Wheel Files ==
== Weapon Files ==
Ready to go beyond the stock Pololu wheels recommended in the sample parts list? How about printing your own custom wheels!
{| class="wikitable"
{| class="wikitable"
|+
|+
! colspan="4" |Double O-Ring Version
! colspan="4" |Cardboard Class
!
!
|-
|-
| colspan="4" |'''Hub Check''' - highly suggested you print one of these and verify shaft fit before printing full wheel(s).
|Basic Weapon Designs
|[https://cloud.knoxmakers.org/s/p9qTtPNza8WeY98 .svg file]
|
|
|-
|Fully editable in Inkscape, these weapons are configured for the red prop drives with the flats on the shaft. There is also a round hub cutout included in the bottom left of the file for the older style gold prop drive motors, simply switch out as needed.
|4.40mm shaft diameter
This group are all about 3.5" in diameter but can easily be scaled larger or smaller, just be sure to ungroup from the hub and scale only the red outline!
(Try on Prusa XL)
|[[File:Weapon.png|thumb|155x155px]]
|[https://cloud.knoxmakers.org/s/DiJmcqCsygc53Js .step file]
|[https://cloud.knoxmakers.org/s/cJDaJH2xkYWRKSd .stl file]
|This shaft diameter - 4.40mm - seems to work well when printed on the Prusa XL (tested 8/12/25) using PETG material but I'd still advise you to print and test fit a hub check yourself before printing wheels.
|[[File:Test Hub - Prusa XL 4.40mm.png|thumb|104x104px]]
|-
| colspan="4" |'''Full Wheel''' - If the shaft size is correct for your application you can download the .stl file and send directly to the printer or download the .step file and edit to your liking!
|
|-
|4.40mm shaft diameter - KILLSWITCH Text
|[https://cloud.knoxmakers.org/s/xe55ZpW46244L35 .step file]
|[https://cloud.knoxmakers.org/s/PWAxR4d8R3XK5T9 .stl file]
|The size of this wheel is comparable to Pololu 80 x 10mm and they  use a [https://www.amazon.com/dp/B089Q6C4CM 5.5mm x 3mm] square nut and a 3mm x 10mm (or longer) screw to secure to the motor d-shaft.
Sized for  2-1/2" ID, 2-3/4" OD, 1/8" Width O-rings. Many variations of these exist, [https://www.amazon.com/dp/B000FN10D8 this is just one]. Try different materials and share what works best for you!
|[[File:KS 2 Slot Wheel - Prusa XL.png|thumb|222x222px]]
|}
|}

Latest revision as of 18:59, 12 March 2026

Below are a number of resources to assist you in building a cardboard class robot for KILLSWITCH. If you have questions or requests please drop them in the Mattermost KILLSWITCH Channel!

Chassis Files

Cardboard Class
Basic rectangular Vertical Spinner .svg file Fully editable in Inkscape, this file should contain everything you need to laser all the necessary cardboard and baltic birch to complete a full, basic cardboard robot. This was designed around the hardware recommended in the wiki.

** Some batteries may be a tight fit in the battery bay, I'd suggest putting a ribbon or similar under the battery to facilitate easy removal if this is the case for you.

Weapon Files

Cardboard Class
Basic Weapon Designs .svg file Fully editable in Inkscape, these weapons are configured for the red prop drives with the flats on the shaft. There is also a round hub cutout included in the bottom left of the file for the older style gold prop drive motors, simply switch out as needed.

This group are all about 3.5" in diameter but can easily be scaled larger or smaller, just be sure to ungroup from the hub and scale only the red outline!

Retrieved from "https://wiki.knoxmakers.org/index.php?title=Cardboard_Build_Resources&oldid=5315"