Nibblerbot/tools/tool 99: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (10 intermediate revisions by the same user not shown) | |||
| Line 10: | Line 10: | ||
| '''Tool Type''' || Touch Probe | | '''Tool Type''' || Touch Probe | ||
|- | |- | ||
| '''Shank Size''' || | | '''Shank Size''' || 6.000 mm | ||
|- | |- | ||
| '''Diameter''' || | | '''Diameter''' || 2.000 mm | ||
|- | |- | ||
| '''Flutes (FL)''' || N/A | | '''Flutes (FL)''' || N/A | ||
| Line 20: | Line 20: | ||
| '''Length of Cut (LOC)''' || 3.6764" | | '''Length of Cut (LOC)''' || 3.6764" | ||
|- | |- | ||
| '''Max RPM''' || | | '''Max RPM''' || N/A | ||
|- | |- | ||
| '''Material''' || Carbide | | '''Material''' || Carbide | ||
Latest revision as of 07:26, 21 January 2025
Tool 99 - Wired Touch Probe
| Attribute | Details |
|---|---|
| Tool # | 99 |
| Tool Type | Touch Probe |
| Shank Size | 6.000 mm |
| Diameter | 2.000 mm |
| Flutes (FL) | N/A |
| Overall Length (OAL) | 3.6764" |
| Length of Cut (LOC) | 3.6764" |
| Max RPM | N/A |
| Material | Carbide |
| Coating | N/A |
| Part Number | B0CC5BFFZW |
| Manufacturer | PGFUN |
| Image |  |
| Order Link | [Click here to purchase this tool] |
Usage Information
Compatible Materials: N/A
Recommended Speeds and Feeds:
RPM: 0 Feed Rate: 2 ipm slow feed rate / 50 ipm fast feed rate Depth of Cut: N/A
Additional Notes
- Additional probe stylus are available in the toolbox. The steel 2mm Ø is installed and probe is calibrated. Do not change the stylus without checking with Czar or Deputy Czar
- This is the Normally closed NPN version of the probe. Transistor circuit needed to work with MESA 7i76e
- Has a USB-C to 1/8" TSR connector.
- Will show as tipped if the USB-C is not plugged into the probe.
- Do not exceed 50ipm rapid with probe.