Discrete ADC Kit: Difference between revisions
Jump to navigation
Jump to search
(Created page with "thumb == Description == The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032...") |
No edit summary |
||
| Line 13: | Line 13: | ||
| 1 || printed circuit board || - | | 1 || printed circuit board || - | ||
|- | |- | ||
| 1 || | | 1 || USB Jack || - | ||
|- | |- | ||
| | | 3 || 0.1uF capacitors || C1-C3 | ||
|- | |- | ||
| | | 11 || LEDs, 5mm or 3mm || D1-D10, D12 | ||
|- | |- | ||
| | | 34 || 4.7k resistors || R1-R34 | ||
|- | |||
| 1 || Potentiometer, 1M || R35 | |||
|- | |||
| 1 || Switch, SPDT || SW1 | |||
|- | |||
| 2 || LM339 quad comparator || U1, U2 | |||
|- | |||
| 1 || L74HC148 encoder || U4 | |||
|- | |||
| 1 || LM4030BCD 4.096V reference || U4 | |||
|} | |} | ||
Revision as of 19:54, 20 September 2022
Description
The Knox Makers Logo Badge educational electronics kit (KM-001) features six self-flashing LEDs and is powered by a CR2032 coin cell battery. Through-hole construction and low parts density make this kit ideal for the soldering novice.
Parts List
| Qty | Part | Designator(s) |
|---|---|---|
| 1 | printed circuit board | - |
| 1 | USB Jack | - |
| 3 | 0.1uF capacitors | C1-C3 |
| 11 | LEDs, 5mm or 3mm | D1-D10, D12 |
| 34 | 4.7k resistors | R1-R34 |
| 1 | Potentiometer, 1M | R35 |
| 1 | Switch, SPDT | SW1 |
| 2 | LM339 quad comparator | U1, U2 |
| 1 | L74HC148 encoder | U4 |
| 1 | LM4030BCD 4.096V reference | U4 |
Instructions
Design
schematic and board layout (Kicad), Gerber files