Nibblerbot/tools/tool 99: Difference between revisions

Revision as of 22:04, 11 January 2025

Attribute	Details
Tool #	99
Tool Type	Touch Probe
Shank Size	6mm
Diameter	2mm
Flutes (FL)	N/A
Overall Length (OAL)	3.6764"
Length of Cut (LOC)	3.6764"
Max RPM	0
Material	Carbide
Coating	Carbide
Part Number	Carbide
Manufacturer	Carbide
Image	File:PGFUN
Order Link	Carbide Click here to purchase this tool

Compatible Materials: Carbide

Recommended Speeds and Feeds:

RPM: Carbide
Feed Rate: B0CC5BFFZW
Depth of Cut: Carbide

N/A

@@ Line 24: / Line 24: @@
 | '''Material''' || Carbide
 |-
-| '''Coating''' || N/A
+| '''Coating''' || Carbide
 |-
-| '''Part Number''' || B0CC5BFFZW
+| '''Part Number''' || Carbide
 |-
-| '''Manufacturer''' || PGFUN
+| '''Manufacturer''' || Carbide
 |-
-| '''Image''' || [[File:tool_99.png|frameless|left]]
+| '''Image''' || [[File:PGFUN|frameless|left]]
 |-
-| '''Order Link''' || [[https://www.amazon.com/dp/B0CC5BFFZW Click here to purchase this tool]]
+| '''Order Link''' || [[Carbide Click here to purchase this tool]]
 |}
 ==Usage Information==
-'''Compatible Materials''': N/A
+'''Compatible Materials''': Carbide
 '''Recommended Speeds and Feeds''':
-  '''RPM''': 0
+  '''RPM''': Carbide
-  '''Feed Rate''': 2 ipm slow feed rate / 50 ipm fast feed rate
+  '''Feed Rate''': B0CC5BFFZW
-  '''Depth of Cut''': N/A
+  '''Depth of Cut''': Carbide
 ==Additional Notes==
-*Additional probe stylus are available in the toolbox. The steel 2mm Ø is installed and probe is calibrated.  Do not change the stylus without checking with Czar or Deputy Czar
+N/A
-*This is the Normally closed NPN version of the probe. Transistor circuit needed to work with MESA 7i76e
-*Has a USB-C to 1/8" TSR connector.
-*Will show as tipped if the USB-C is not plugged into the probe.
-*Do not exceed 50ipm rapid with probe.