Nibblerbot/tools: Difference between revisions
From Knox Makers Wiki
No edit summary |
|||
| Line 1: | Line 1: | ||
== Tool Groups == | == Tool Groups == | ||
[[#V-bits_Engraving|T10–T19 / V-bits / Engraving]] | [[#V-bits_Engraving|T10–T19 / V-bits / Engraving]]<Br> | ||
[[#Upcut_Endmills|T20–T29 / Upcut Endmills]] | [[#Upcut_Endmills|T20–T29 / Upcut Endmills]] | ||
Revision as of 00:03, 28 July 2025
Tool Groups
T10–T19 / V-bits / Engraving
T20–T29 / Upcut Endmills
T40–T49 / Compression Endmills
T80–T89 / Roundover / Form Tools
V-bits / Engraving
Upcut Endmills
- Tool 20 - 3/16" 2 Flute Spiral Upcut 0.7500 loc 2.5000 oal
- Tool 21 - 1/4" 2 Flute Upcut End Mill 0.7500 loc 2.500 oal
- Tool 22 - 1/4" O Flut Carbide Upcut NARCO 1.000 loc 2.500 oal
Downcut Endmills
- Tool 30 - 3/16" 2 Flute Spiral Down Cut 0.7500 loc 2.5000 oal
- Tool 31 - 1/4" 2 Flute Spiral Down Cut 1.000 loc 2.500 oal
- Tool 32 - 1/2" 2FL Spiral Down Cutl TAC 1.250 loc 3.000 oal
Compression Endmills
- Tool 40 - 1/4" 2 Flute COMP End Mill 1.000 loc 2.500 oal
- Tool 41 - 1/4" 2FL COMP End Mill ASTRA 1.000 loc 2.500 oal
- Tool 42 - 1/2" 2FL COMP End Mill NACRO 1.500 loc 4.000 oal
- Tool 43 - 1/2" 2FL COMP End Mill TAC 1.250 loc 3.000 oal
Ballnose Endmills
- Tool 50 - 1/4" 2 Flute Upcut Ball Nose Mill 0.7500 loc 2.500 oal
- Tool 51 - 1/4" 2 Flute Ball Nose Downcut 1.000 loc 2.500 oal
Surfacing Bits
Bowl & Tray
- Tool 70 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.250 oal
- Tool 71 - 3/4" Bowl & Tray Bit 0.625 loc 2.375 oal
Roundover / Form Tools
- Tool 80 - 3/4" Point Roundover Bit 0.625 loc 2.250 oal
- Tool 81 - 1/2" Point Roundover Bit 0.500 loc 2.000 oal
Specialty Tools
