ClusterPuck v1.0: Difference between revisions
Jump to navigation
Jump to search
Switchnand (talk | contribs) (→Pucks) |
Switchnand (talk | contribs) |
||
| Line 23: | Line 23: | ||
|} | |} | ||
[http://blog.thingiverse.com/2012/08/22/lost-and-found-air-hockey-edition/ Thingiverse] has some models for 3D printed pucks but we wanted some with the Knoxmakers logo on it. Adan is busy making some prototypes based on specifications. | [http://blog.thingiverse.com/2012/08/22/lost-and-found-air-hockey-edition/ Thingiverse] has some models for 3D printed pucks but we wanted some with the Knoxmakers logo on it. Adan is busy making some prototypes based roughly on the specifications of the pucks that came with the table. | ||
===Pucks with Embedded Magnets=== | ===Pucks with Embedded Magnets=== | ||
Revision as of 16:54, 5 February 2013
Currently waiting on results of Tuesday brainstorming session for more detailed plan.
Pucks
3D Printed Pucks
Puck design looks good and we have some numbers and dimensions to run with:
| Diameter | |
|---|---|
| Thickness | ~0.18" |
| Weight | 12 g? |
| File |
Thingiverse has some models for 3D printed pucks but we wanted some with the Knoxmakers logo on it. Adan is busy making some prototypes based roughly on the specifications of the pucks that came with the table.
Pucks with Embedded Magnets
Printed prototype with an embedded NdFeB magnet has been made and tested. Puck floats great, deflects great too.
Specs for the puck:
| Diameter | |
|---|---|
| Thickness | ~0.18" |
| Weight | 12 g? |
| File |
Specs for the magnet:
| Diameter | 0.5" |
|---|---|
| Thickness | 0.1" |
| Weight | ~3g |