Nibblerbot/tools/tool 99: Difference between revisions

Revision as of 06:38, 12 December 2024

Attribute	Details
Tool #	99
Tool Type	Touch Probe
Flutes (FL)	N/A
Overall Length (OAL)	N/A
Length of Cut (LOC)	N/A
Max RPM	N/A
Diameter	2mm Ø - Tip
Material	N/A
Coating	N/A
Part Number	B0CC5BFFZW
Manufacturer	PGFUN
Image
Order Link	[Click here to purchase this tool]

Compatible Materials: N/A

Recommended Speeds and Feeds:

RPM: 0  
Feed Rate: 2 ipm slow feed rate / 50 ipm fast feed rate 
Depth of Cut: N/A

Additional probe stylus are available in the toolbox. The steel 2mm Ø is installed and probe is calibrated. Do not change the stylus without checking with Czar or Deputy Czar
This is the Normally closed NPN version of the probe. Transistor circuit needed to work with MESA 7i76e
Has a USB-C to 1/8" TSR connector.
Will show as tipped if the USB-C is not plugged into the probe.
Do not exceed 50ipm rapid with probe.

@@ Line 1: / Line 1: @@
-==Tool 99 - Wired Touch Probe ==
+==Tool 99 - Wired Touch Probe==
 {| class="wikitable"
 |-
@@ Line 14: / Line 15: @@
 | '''Length of Cut (LOC)''' || N/A
 |-
-| '''Max RPM''' || 0 RPM
+| '''Max RPM''' || N/A
 |-
 | '''Diameter''' || 2mm Ø - Tip
@@ Line 21: / Line 22: @@
 |-
 | '''Coating''' || N/A
+|-
+| '''Part Number''' || B0CC5BFFZW
 |-
 | '''Manufacturer''' || PGFUN
 |-
-| '''Image''' ||
+| '''Image''' || [[File:tool_99.png|frameless|left]]
-[[File:Tool 99.png|frameless|left]]
 |-
 | '''Order Link''' || [[https://www.amazon.com/gp/product/B0CC5BFFZW Click here to purchase this tool]]
@@ Line 31: / Line 33: @@
 ==Usage Information==
-- '''Recommended Speeds and Feeds''':
+'''Compatible Materials''': N/A
-  - '''RPM''': 0
-  - '''Feed Rate''': 2 ipm slow feed rate / 50 ipm fast feed rate
+'''Recommended Speeds and Feeds''':
+ '''RPM''': 0
+ '''Feed Rate''': 2 ipm slow feed rate / 50 ipm fast feed rate
+ '''Depth of Cut''': N/A
 ==Additional Notes==