Nibblerbot/tools: Difference between revisions
From Knox Makers Wiki
No edit summary |
|||
| Line 1: | Line 1: | ||
== Tool Groups == | == Tool Groups == | ||
* [[#V- | * [[#V-bits_Engraving|V-bits / Engraving (T10–T19)]] | ||
* [[#Upcut_Endmills|Upcut Endmills (T20–T29)]] | * [[#Upcut_Endmills|Upcut Endmills (T20–T29)]] | ||
* [[#Downcut_Endmills|Downcut Endmills (T30–T39)]] | * [[#Downcut_Endmills|Downcut Endmills (T30–T39)]] | ||
| Line 11: | Line 11: | ||
<span id="V- | <span id="V-bits_Engraving"></span> | ||
'''V-bits / Engraving''' | '''V-bits / Engraving''' | ||
Revision as of 23:57, 27 July 2025
Tool Groups
- V-bits / Engraving (T10–T19)
- Upcut Endmills (T20–T29)
- Downcut Endmills (T30–T39)
- Compression Endmills (T40–T49)
- Ballnose Endmills (T50–T59)
- Surfacing Bits (T60–T69)
- Bowl & Tray (T70–T79)
- Roundover / Form Tools (T80–T89)
- Specialty Tools (T90–T99)
V-bits / Engraving
Upcut Endmills
- Tool 20 - 3/16" 2 Flute Spiral Upcut 0.7500 loc 2.5000 oal
- Tool 21 - 1/4" 2 Flute Upcut End Mill 0.7500 loc 2.500 oal
- Tool 22 - 1/4" O Flut Carbide Upcut NARCO 1.000 loc 2.500 oal
Downcut Endmills
- Tool 30 - 3/16" 2 Flute Spiral Down Cut 0.7500 loc 2.5000 oal
- Tool 31 - 1/4" 2 Flute Spiral Down Cut 1.000 loc 2.500 oal
- Tool 32 - 1/2" 2FL Spiral Down Cutl TAC 1.250 loc 3.000 oal
Compression Endmills
- Tool 40 - 1/4" 2 Flute COMP End Mill 1.000 loc 2.500 oal
- Tool 41 - 1/4" 2FL COMP End Mill ASTRA 1.000 loc 2.500 oal
- Tool 42 - 1/2" 2FL COMP End Mill NACRO 1.500 loc 4.000 oal
- Tool 43 - 1/2" 2FL COMP End Mill TAC 1.250 loc 3.000 oal
Ballnose Endmills
- Tool 50 - 1/4" 2 Flute Upcut Ball Nose Mill 0.7500 loc 2.500 oal
- Tool 51 - 1/4" 2 Flute Ball Nose Downcut 1.000 loc 2.500 oal
Surfacing Bits
Bowl & Tray
- Tool 70 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.250 oal
- Tool 71 - 3/4" Bowl & Tray Bit 0.625 loc 2.375 oal
Roundover / Form Tools
- Tool 80 - 3/4" Point Roundover Bit 0.625 loc 2.250 oal
- Tool 81 - 1/2" Point Roundover Bit 0.500 loc 2.000 oal
Specialty Tools
