Nibblerbot/tools: Difference between revisions
From Knox Makers Wiki
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
== Tool Groups == | == Tool Groups == | ||
* [[#V-bits_Engraving|V-bits / Engraving | * [[#V-bits_Engraving|T10–T19 V-bits / Engraving]] | ||
* [[#Upcut_Endmills|Upcut Endmills | * [[#Upcut_Endmills|T20–T29 Upcut Endmills]] | ||
* [[#Downcut_Endmills|Downcut Endmills | * [[#Downcut_Endmills|T30–T39 Downcut Endmills]] | ||
* [[#Compression_Endmills|Compression Endmills | * [[#Compression_Endmills|T40–T49 Compression Endmills]] | ||
* [[#Ballnose_Endmills|Ballnose Endmills | * [[#Ballnose_Endmills|T50–T59 Ballnose Endmills]] | ||
* [[#Surfacing_Bits|Surfacing Bits | * [[#Surfacing_Bits|T60–T69 Surfacing Bits]] | ||
* [[#Bowl_&_Tray|Bowl & Tray | * [[#Bowl_&_Tray|T70–T79 Bowl & Tray]] | ||
* [[#Roundover_Form_Tools|Roundover / Form Tools | * [[#Roundover_Form_Tools|T80–T89 Roundover / Form Tools]] | ||
* [[#Specialty_Tools|Specialty Tools | * [[#Specialty_Tools|T90–T99 Specialty Tools]] | ||
Revision as of 23:59, 27 July 2025
Tool Groups
- T10–T19 V-bits / Engraving
- T20–T29 Upcut Endmills
- T30–T39 Downcut Endmills
- T40–T49 Compression Endmills
- T50–T59 Ballnose Endmills
- T60–T69 Surfacing Bits
- T70–T79 Bowl & Tray
- T80–T89 Roundover / Form Tools
- T90–T99 Specialty Tools
V-bits / Engraving
Upcut Endmills
- Tool 20 - 3/16" 2 Flute Spiral Upcut 0.7500 loc 2.5000 oal
- Tool 21 - 1/4" 2 Flute Upcut End Mill 0.7500 loc 2.500 oal
- Tool 22 - 1/4" O Flut Carbide Upcut NARCO 1.000 loc 2.500 oal
Downcut Endmills
- Tool 30 - 3/16" 2 Flute Spiral Down Cut 0.7500 loc 2.5000 oal
- Tool 31 - 1/4" 2 Flute Spiral Down Cut 1.000 loc 2.500 oal
- Tool 32 - 1/2" 2FL Spiral Down Cutl TAC 1.250 loc 3.000 oal
Compression Endmills
- Tool 40 - 1/4" 2 Flute COMP End Mill 1.000 loc 2.500 oal
- Tool 41 - 1/4" 2FL COMP End Mill ASTRA 1.000 loc 2.500 oal
- Tool 42 - 1/2" 2FL COMP End Mill NACRO 1.500 loc 4.000 oal
- Tool 43 - 1/2" 2FL COMP End Mill TAC 1.250 loc 3.000 oal
Ballnose Endmills
- Tool 50 - 1/4" 2 Flute Upcut Ball Nose Mill 0.7500 loc 2.500 oal
- Tool 51 - 1/4" 2 Flute Ball Nose Downcut 1.000 loc 2.500 oal
Surfacing Bits
Bowl & Tray
- Tool 70 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.250 oal
- Tool 71 - 3/4" Bowl & Tray Bit 0.625 loc 2.375 oal
Roundover / Form Tools
- Tool 80 - 3/4" Point Roundover Bit 0.625 loc 2.250 oal
- Tool 81 - 1/2" Point Roundover Bit 0.500 loc 2.000 oal
Specialty Tools
