Nibblerbot/tools: Difference between revisions
From Knox Makers Wiki
No edit summary |
No edit summary |
||
| Line 14: | Line 14: | ||
'''V-bits / Engraving''' | '''V-bits / Engraving''' | ||
*[[Nibblerbot/tools/tool 10|Tool 10 - 1/2" 90 V-Groove Bit 0.2500 loc 1.875 oal]] | *[[Nibblerbot/tools/tool 10|Tool 10 - 1/2" 90 V-Groove Bit 0.2500 loc 1.875 oal]] | ||
[[#top|Top]] | [[#top|[Top]]] | ||
Revision as of 04:48, 28 July 2025
== Tool Groups ==
T10–T19 / V-bits / Engraving
T20–T29 / Upcut Endmills
T30–T39 / Downcut Endmills
T40–T49 / Compression Endmills
T50–T59 / Ballnose Endmills
T60–T69 / Surfacing Bits
T70–T79 / Bowl & Tray
T80–T89 / Roundover / Form Tools
T90–T99 / Specialty Tools
V-bits / Engraving
Upcut Endmills
- Tool 20 - 3/16" 2 Flute Spiral Upcut 0.7500 loc 2.5000 oal
- Tool 21 - 1/4" 2 Flute Upcut End Mill 0.7500 loc 2.500 oal
- Tool 22 - 1/4" O Flut Carbide Upcut NARCO 1.000 loc 2.500 oal
<a href="#top">[top]</a>
Downcut Endmills
- Tool 30 - 3/16" 2 Flute Spiral Down Cut 0.7500 loc 2.5000 oal
- Tool 31 - 1/4" 2 Flute Spiral Down Cut 1.000 loc 2.500 oal
- Tool 32 - 1/2" 2FL Spiral Down Cut TAC 1.250 loc 3.000 oal
<a href="#top">[top]</a>
Compression Endmills
- Tool 40 - 1/4" 2 Flute COMP End Mill 1.000 loc 2.500 oal
- Tool 41 - 1/4" 2FL COMP End Mill ASTRA 1.000 loc 2.500 oal
- Tool 42 - 1/2" 2FL COMP End Mill NACRO 1.500 loc 4.000 oal
- Tool 43 - 1/2" 2FL COMP End Mill TAC 1.250 loc 3.000 oal
<a href="#top">[top]</a>
Ballnose Endmills
- Tool 50 - 1/4" 2 Flute Upcut Ball Nose Mill 0.7500 loc 2.500 oal
- Tool 51 - 1/4" 2 Flute Ball Nose Downcut 1.000 loc 2.500 oal
<a href="#top">[top]</a>
Surfacing Bits
<a href="#top">[top]</a>
Bowl & Tray
- Tool 70 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.250 oal
- Tool 71 - 3/4" Bowl & Tray Bit 0.625 loc 2.375 oal
<a href="#top">[top]</a>
Roundover / Form Tools
- Tool 80 - 3/4" Point Roundover Bit 0.625 loc 2.250 oal
- Tool 81 - 1/2" Point Roundover Bit 0.500 loc 2.000 oal
<a href="#top">[top]</a>
Specialty Tools
<a href="#top">[top]</a>
