Group 3D Printer
Jump to navigation
Jump to search
Overview
The group has purchased and assembled a Prusa Mendel 3D printer. This page gives some instructions on its use
Mechanicals and Electronics
The Prusa Mendel is a type of RepRap printer http://www.reprap.org/wiki/Main_Page . It uses threaded rods for the frame, with a total of 5 stepper motors... 1 for X, Y, and the extruder, and 2 for the Z axis. Our version uses a RAMPS v1.4 board, with a SD card reader and LED display panel for headless printing.
Software
slic3r
Printrun
Configuration Files
Procedure
Create the GCODE
Connect to the Printer
Load the GCODE into pronterface
Preheat the bed
Home the X and Y axes
Home the Z axis
First Layer Adhesion
Resources
The group is pooling resources to create a Makerspace owned 3D printer. Andronicus is leading the efforts, with a build goal deadline of 1/15
Current Status
As of 02/19/2013, the space printer is printing parts with some degree of accuracy. Hardware and software changes frequently.
Specifications
Financial Contributions
- Adan
- Dr. Strangegun
- Issac
- Sam
- Shane
Things to Buy
Electronics
- Full electronics http://gadgets3d.com/index.php?route=product/product&path=61_66&product_id=70 $198 + $20 shipping - ORDERED
- Power supply http://www.amazon.com/gp/product/B009EIANT2/ref=oh_details_o01_s00_i00 $26.96 + $5.44 shipping
- Hot End https://www.hotends.com/index.php?route=product/product&product_id=88 $62.49 + $3.75 shipping
- 5x Stepper Motors https://www.lulzbot.com/?q=products/nema-17-stepper-motors $87.50 + $12.00 shipping - ORDERED