Nibblerbot/tools

Tool 10 - 1/2" 90° V-Groove Bit
Tool 11 - 1/4" 2 Flute Upcut Ball Nose Mill
Tool 12 - 1/4" 2 Flute Upcut End Mill
Tool 13 - 1/4" 2 Flute Compression End Mill
Tool 14 - 2" 4 Flute Carbide Spoil Board Bit
Tool 15 - 1/2" 2FL COMP End Mill NACRO 1.500 loc 4.000 oal
Tool 16 - 1/4" 2FL COMP End Mill ASTRA 1.000 loc 2.500 oal
Tool 17 - 1/4" 2 Flute Spiral Down Cut 1.000 loc 2.500 oal
Tool 20 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.250 oal
Tool 21 - 3/4" Bowl & Tray Bit 0.625 loc 2.375 oal
Tool 22 - 2" 3 Flute Carbide Insert Spoil Board Bit
Tool 24 - 3/4" Point Roundover Bit 0.625 loc 2.250 oal
Tool 25 - 1/2" Point Roundover Bit 0.500 loc 2.000 oal
Tool 99 - Wired Touch Probe