Community Outreach
This page is intended to be a resume of community outreach activities performed by Knox Makers.
(more information to follow)
2012
Atlanta Mini-Maker Faire '12
October 6, 2012, Atlanta, GA.
Summary:
This event was hosted at the Tech Walkway at the GA Institute of Technology.
...WIP, needs better description.
Pics:
...WIP, needs pics.
More info:
https://knoxmakers.org/node/114
https://knoxmakers.org/node/119
Earn-A-Computer (EAC)
...WIP, needs everything
2013
1st Annual Steampunk Carnivale
June 28, 2013, Knoxville, TN.
Summary:
...WIP, needs summary.
Pics:
...WIP, needs pics.
More info:
http://www.steampunkcarnivale.com
https://www.facebook.com/SteampunkCarnivale
Kingsport Mini-Maker Faire '13
July 14, 2013, Kingsport, TN.
Summary:
...WIP, needs summary.
Pics:
...WIP, needs pics.
More info:
http://makerfairekingsport.wordpress.com
https://www.facebook.com/pages/Kingsport-Mini-Maker-Faire/169746763174965
Nashville Mini-Maker Faire '13
September 17, 2013, Nashville, TN.
Summary:
...WIP, needs description.
Pics:
https://www.flickr.com/photos/sam_the_giant/9873925406/
More info:
http://nashvillemakerfaire.com
https://knoxmakers.org/node/181
Atlanta Mini-Maker Faire '13
October 26, 2013, Atlanta, GA.
Summary:
...WIP, needs summary.
Pics:
...WIP, needs pics.
More info:
2014
Dogwood Arts Festival
Children's Festival of Reading
Robot Extravaganza
Blount County BBQ Bash
Mad Scientist Day!
2nd Annual Steampunk Carnivale
2014 STARs
National Day of Making '14
June 18, 2014, Knoxville/Oak Ridge, TN.
Summary:
This event was hosted onsite at Knox Makers, by Knox Makers in participation with the White House. The Whitehouse simultaneously hosted the 1st Annual National Day of Making and the 1st Annual Whitehouse Makerfaire on June 18, 2014. For the National Day of Making portion, creative learning spaces were invited to co host mini Makerfaires in their locations.
Knox Makers participated by opening the doors for a full day with a small open house that included 3D printing exhibits, a demonstration of Pablo the Polargraph Drawing Bot, an interactive MaKey MaKey exhibit, refreshments, and private tours available. For the main feature, Knox Makers hosted a special Open Art Night later in the evening.
This was a small event that included less than 10 participants total. This event was staffed by two volunteers, including one Board member. This event was broadcast to Twitter, the Knox Makers Google Group, and the Knox Makers Google Calendar.
Pics:
https://twitter.com/theodoreoffline/status/479313488188551168/photo/1
https://twitter.com/theodoreoffline/status/479303180120240128/photo/1
https://pbs.twimg.com/media/BqbIVEGIMAEQttN.jpg
https://pbs.twimg.com/media/BqbIVE5IgAA7Eib.jpg
https://twitter.com/KnoxMakers/status/478933250690531328/photo/1
More info:
http://www.whitehouse.gov/maker-faire
Kingsport Mini-Maker Faire '14
July 13, 2014, Kingsport, TN.
Summary:
Knox Makers arrived at the auditorium on Sunday with Pablo and three 3D printers, the first thing we saw was someone else's large polargraph (drawing on a whiteboard) and about half a dozen Makerbot 3D printers. We felt our thunder had been stolen, but we set up anyway.
We're glad we did. Our booth was in a high foot traffic area and remained busy all day. We met a couple of kindred spirits that we expect to see at a Tuesday workshop soon. We also got to talk to a lot of folks who had heard of 3D printing, but weren't really sure what it was and/or had never seen it in person.
We enjoyed explaining to folks that the other 3D printers on display were "store bought," while ours were lovingly handcrafted by local nerds. This attracted a lot of interest, as did Pablo's drawings that accumulated and got taped up as the day progressed. Many folks asked what business we were in, and seemed pleasantly surprised to discover that we were representing a non-profit hobby group and not trying to hawk anything. Issac gave out many KM-branded keychain trinkets, and Doug learned about the heartache of 3D printing with nylon live and in public.
Partway through the day, Bumblebee's extruder tension arm broke. Happily, Issac's (unnamed) printer was able to manufacture a replacement part on the spot, which Sam promptly installed. The tale of the one machine "repairing" the other captivated a number of folks, and the jaunty red tension arm stood out and served as a conversation piece for the rest of the day.
Toward the end, a couple of kids (about 8 and 14) from the FIRST robotics table next door came over with a laptop, having excitedly just designed a little 3D man (their ode to Minecraft's Steve) that they hoped we'd print for them. I wasn't "taking requests," but their earnest young faces were irresistible. I managed to slice it with support and get it printed just in time, and their reaction was totally worth it. It was a nice way to end the day.
Pics:
...WIP, needs pics.
More info:
...WIP, needs more info.
Nashville Mini-Maker Faire '14
September 13, 2014. Nashville, TN.
Summary:
This event was hosted at Adventure Science Center in Nashville, Tennessee.
“The Nashville Mini Maker Faire (or NMMF from here on out) is a one day exhibition of creative making. Think of NMMF as a local version of Maker Faire Bay Area or World Maker Faire New York, two yearly exhibitions organized by Make Magazine. NMMF is one of over 100 “mini” faires around the globe, organized by local grassroots makers.” Retrieved from Nashville Mini Maker Faire website.
…WIP, needs summary of KM booth/presentations/etc
Pics:
…WIP, needs pics
More info:
More info: http://nashvillemakerfaire.com/
Louisville Mini-Maker Faire '14
September 27, 2014, Lousiville, KY.
Summary:
This was hosted throughout the 800 block of East Market Street in Louisville, Kentucky.
“Maker Faire: Lou is a “Mini” Maker Faire and is a celebration of everything made in the Louisville, KY area. We aim to bring all the enthusiasm and all the fun on a slightly smaller scale. At Maker Faire Louisville Makers, Crafters, Inventors, Evil Geniuses, Scientists and Artists come together for a day of family-friendly fun and inspiration. From home-made cookies to home-made robots, Maker Faire: Lou promises something for everyone in a showcase of the American creative spirit.” Retrieved from Lousiville Makerfaire website.
…WIP, needs summary of KM booth/presentations/etc
Pics:
…WIP, needs pic/video
More info:
Atlanta Maker Faire '14
October 4-5, 2014, Atlanta, GA.
Summary:
This was hosted at Exhibition Area A and B, located beside the Calloway Building and along both sides of N McDonough Street, respectively, in Downtown Decatur, Georgia.
“What is a Maker Faire? Simply put, a Maker Faire is an event created by Make magazine to ‘celebrate arts, crafts, engineering, science projects and the Do-It-Yourself (DIY) mindset.’” Retrieved from Atlanta Makerfaire website.
…WIP, needs summary of KM booth/presentations/etc
Pics:
…WIP, needs pics
More info:
STFK Science Café "Will 3D Printing Change the World?"
December 2, 2014, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
First Friday Demo
December 5. 2014, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Arts and Cultural Alliance Member Meeting
December 10, 2014, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
2015
L&N STEMpunks - Knox Makers Agile Projects Demo
January 15, 2015, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
A1 Lab Arts Outreach
January 24, 2015, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Mad Science Bingo @ Spring Place
January 26, 2015, Lenoir City, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Lunch and Learn w/ Robots at Loudon County Senior Center
February 5, 2015, Loudon, TN.
Summary:
Pics:
…WIP, needs pics
More info:
CBA Maker Convention
February 18, 2015, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
First Friday at TechCo
March 6, 2015, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Knox Makers at Big Orange STEM Symposium
April 18, 2015, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Presentation to IEEE
April 23, 2015, Oak Ridge, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Knox Makers at Marble City Comicon
April 25 and 26, 2015, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Ongoing outreach partners and programs
Library outreach
Ongoing, Knoxville, TN and Oak Ridge, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Arts and Cultural Alliance
Ongoing, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
TechCo
Ongoing, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
The MUSE
Ongoing, Knoxville, TN.
Summary:
Pics:
…WIP, needs pics
More info:
Subgroups
Knox Makers offers free meeting space and programs for external groups related to science, technology, engineering, arts, and mathematics.
Capture the Flag Thursdays
Ongoing, Oak Ridge, TN.
Summary:
This group has been meeting since July of 2014 at Knox Makers every first and third Thursday. This is an initiative by the local dc865 technology and security group.
Pics:
…WIP, needs pics
More info:
PyKnoxville Meetup Group
Ongoing, Oak Ridge, TN.
Summary:
This group has been meeting since April of 2015 at Knox Makers every first Wednesday. This is an external group that organized independently on Meetup.com and needed a place to meet, so a Knox Makers member reached out and offered event hosting. This group meets to learn about Python programming together.
Pics:
…WIP, needs pics
More info:
Knoxville Meshnet
Ongoing, Oak Ridge, TN.
Summary:
This group has been meeting since May of 2015 at Knox Makers every second Friday. This is an external group that sprang out of the PyKnoxville group on Meetup.com that needed a place to meet. Knox Makers has offered event hosting to the group on a recurring basis. This group meets to learn about and establish a local experimental mesh networking technology system.
Pics:
…WIP, needs pics
More info: