Nibblerbot/tools

Tool Groups

T10–T19 / V-bits / Engraving
T20–T29 / Upcut Endmills
T30–T39 / Downcut Endmills
T40–T49 / Compression Endmills
T50–T59 / Ballnose Endmills
T60–T69 / Surfacing Bits
T70–T79 / Bowl & Tray
T80–T89 / Roundover / Form Tools
T90–T99 / Specialty Tools

V-bits / Engraving

• Tool 10 - 1/2" 90 V-Groove Bit 0.2500 loc 1.875 oal

Upcut Endmills

• Tool 20 - 3/16" 2 Flute Spiral Upcut 0.7500 loc 2.5000 oal
• Tool 21 - 1/4" 2 Flute Upcut End Mill 0.7500 loc 2.500 oal
• Tool 22 - 1/4" O Flut Carbide Upcut NARCO 1.000 loc 2.500 oal

Downcut Endmills

• Tool 30 - 3/16" 2 Flute Spiral Down Cut 0.7500 loc 2.5000 oal
• Tool 31 - 1/4" 2 Flute Spiral Down Cut 1.000 loc 2.500 oal
• Tool 32 - 1/2" 2FL Spiral Down Cutl TAC 1.250 loc 3.000 oal

Compression Endmills

• Tool 40 - 1/4" 2 Flute COMP End Mill 1.000 loc 2.500 oal
• Tool 41 - 1/4" 2FL COMP End Mill ASTRA 1.000 loc 2.500 oal
• Tool 42 - 1/2" 2FL COMP End Mill NACRO 1.500 loc 4.000 oal
• Tool 43 - 1/2" 2FL COMP End Mill TAC 1.250 loc 3.000 oal

Ballnose Endmills

• Tool 50 - 1/4" 2 Flute Upcut Ball Nose Mill 0.7500 loc 2.500 oal
• Tool 51 - 1/4" 2 Flute Ball Nose Downcut 1.000 loc 2.500 oal

Surfacing Bits

• Tool 60 - 2" 4 Flute Carbide Spoil Board Bit
• Tool 61 - 2" 3 Flute Carbide Insert Spoil Board Bit

Bowl & Tray

• Tool 70 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.250 oal
• Tool 71 - 3/4" Bowl & Tray Bit 0.625 loc 2.375 oal

Roundover / Form Tools

• Tool 80 - 3/4" Point Roundover Bit 0.625 loc 2.250 oal
• Tool 81 - 1/2" Point Roundover Bit 0.500 loc 2.000 oal

Specialty Tools

• Tool 99 - Wired Touch Probe