Difference between revisions of "COVID19 Response"

From Knox Makers Wiki
Jump to: navigation, search
(Suggested Print Settings for Face Shields)
(Suggested Print Settings for Face Shields)
Line 52: Line 52:
| Speed || As fast as stable
| Speed || As fast as stable
[[file:Cura settings prusa rc3 PETG.png|frameless|suggested settings to print quickly with Cura (tested on custom printer with 0.4mm volcano nozzle)]]
[[Image:Cura settings prusa rc3 PETG.png|800px |link=https://wiki.knoxmakers.org/images/1/18/Cura_settings_prusa_rc3_PETG.png |alt=Suggested cura settings|Title Suggested cura settings]]
== Bias Tape Makers ==
== Bias Tape Makers ==

Revision as of 23:05, 14 April 2020


Knox Makers is organizing efforts to create and provide protective equipment and support to our local health community.


Face Shields Laser Cut Part

Single printed part stls:

Bias Tape Makers
Surgical Mask Straps

Face Shields

A face shield to be worn by medical workers. Our design is based on the Prusa Face Shield with alterations made in response to feedback from UT Emergency Department. It involves a 3d printed part printed part, a laser cut part, and button hole elastic.


3D Printed PETG, ABS, ASA, PLA, PC, Nylon (please print the corresponding file)
Laser Cut An acetate plastic

7mil to 20mil (thicker is preferred)

Suggested Print Settings for Face Shields

Wall thickness 1.2mm
Layer height 0.2-0.3mm
Infill density 30%
Speed As fast as stable

Suggested cura settings

Bias Tape Makers

Bias tape makers help make the pleats in the fabric masks. They can be 3d printed and are helpful to the community making these masks.

Fabric Masks

Surgical Mask Straps

The surgical mask straps hold the elastic that normally is held by a health worker's ears. It helps save the irritation caused by prolonged usage. These can be 3d printed.