ClusterPuck v1.0: Difference between revisions

From Knox Makers Wiki
Jump to navigation Jump to search
No edit summary
Line 5: Line 5:
==Pucks==
==Pucks==
===3D Printed Pucks===
===3D Printed Pucks===
[[File:knoxpuck.jpeg|thumb|alt=puck|3D printed puck with KnoxMakers logo]]
[[File:knoxpuck.jpg|thumb|alt=puck|3D printed puck with KnoxMakers logo]]
[http://blog.thingiverse.com/2012/08/22/lost-and-found-air-hockey-edition/ Thingiverse] has some models for 3D printed pucks but we wanted some with the Knoxmakers logo on it. Adan is busy making some prototypes based on specifications. Current design weighs 12g.
[http://blog.thingiverse.com/2012/08/22/lost-and-found-air-hockey-edition/ Thingiverse] has some models for 3D printed pucks but we wanted some with the Knoxmakers logo on it. Adan is busy making some prototypes based on specifications. Current design weighs 12g.



Revision as of 03:58, 5 February 2013

Puck design looks good and we have some numbers and dimensions to run with

currently waiting on results of tuesday brainstorming session.

Pucks

3D Printed Pucks

File:Knoxpuck.jpg
3D printed puck with KnoxMakers logo

Thingiverse has some models for 3D printed pucks but we wanted some with the Knoxmakers logo on it. Adan is busy making some prototypes based on specifications. Current design weighs 12g.

Pucks with Embedded Magnets

File:Knoxpuck magnet pic.png
3D printed puck with KnoxMakers logo and embedded magnet

Printed prototype with an embedded NdFeB magnet has been made and tested. Add 3g to weight for magnet.