Grand Opening Planning: Difference between revisions

From Knox Makers Wiki
Jump to navigation Jump to search
No edit summary
m (→‎Flyers: added places flyers have been dropped off)
 
(29 intermediate revisions by 4 users not shown)
Line 5: Line 5:
*Date set as September 29
*Date set as September 29
*Time proposed as 2-5pm
*Time proposed as 2-5pm
**Without a reliable attendee estimate, we are uncomfortable planning to serve food.
**We will have water and other drinks on hand. Request members volunteer to bring coolers & ice.


=Menu=
=Menu=
*Grilling burgers and dogs for quick/easy production
*Without a reliable attendee estimate, we are uncomfortable planning to serve food of any substance.
*Need some vegetarian/celiac friendly options
*We'll have coffee (supplied by Brad of Mojoe's)
*We will have water and other drinks on hand. Request members volunteer to bring coolers & ice.
*We should have some chips and snacks of some sort.


=Events=
=Events=
We had tons of great brainstorming about events.  We had thought of having about 6 twenty minutes talks.  That would leave about 10 minutes for Q&A, presentation switch over, etc.  That would be about 3 hours of presentation, and roughly an hour break for food.  We really like the idea of letting people make/participate as much as possible.  Best case ideas let people do things in the space.  The next best thing would be to give people project instructions that they can take home.  A fantastic idea was to connect our short presentations to a longer event already scheduled at one of our public meetings.  We give them a tease, then encourage them to come back by showing them that the full presentation is on the calendar.  This should do a great job of helping to bring people back to the space.
We had tons of great brainstorming about events.  We had thought of having about 6 twenty minutes talks.  That would leave about 10 minutes for Q&A, presentation switch over, etc.  That would be about 3 hours of presentation, <s>and roughly an hour break for food</s>.  We really like the idea of letting people make/participate as much as possible.  Best case ideas let people do things in the space.  The next best thing would be to give people project instructions that they can take home.  A fantastic idea was to connect our short presentations to a longer event already scheduled at one of our public meetings.  We give them a tease, then encourage them to come back by showing them that the full presentation is on the calendar.  This should do a great job of helping to bring people back to the space.


==Ideas for potential 20 minute presentations/teasers==
==Ideas for potential 20 minute presentations/teasers==
*An Arduino-based presentation that would show some of the projects our members have already completed with Arduinos as well as show some great Arduino projects we know about on the internet. We would need someone to volunteer to develop/lead this seminar. 
**I could get my PID controller demo put back together as a live demo.
**We should schedule another "Getting started with Arduino" class for later in the year to refer this session to.
**Maybe include other boards like the makey-makey.
*A raspberry pi presentation.  We would need someone with a raspi to take point on this one and develop this talk.
*A raspberry pi presentation.  We would need someone with a raspi to take point on this one and develop this talk.
**Ideally, we could develop this into a longer presentation to put on the calendar to let us dig in deeper (and encourage attendees to return).
**Ideally, we could develop this into a longer presentation to put on the calendar to let us dig in deeper (and encourage attendees to return).
**Presenter: Jess
**Time: 2:00 PM
*A KMBI presentation.  Adan has volunteered to lead/present this presentation.
*A KMBI presentation.  Adan has volunteered to lead/present this presentation.
**Include a recap of the boat building process.
**Include a recap of the boat building process.
**Perhaps have some sort of scale demo to show off part of the process.
**Perhaps have some sort of scale demo to show off part of the process.
**Hopefully have another boat in the queue and invite attendees back to one of the working sessions.
**Hopefully have another boat in the queue and invite attendees back to one of the working sessions.
*A presentation on dyeing cloth.  I would volunteer to lead this presentation.
**Presenter: Adan
**Show the process for making the acoustic panels.
**Time: 2:30 PM
**Explain/demo the cloth dyeing process.  It's possible that if I did this early enough that by the end the cloth would be rinsed well enough to hold up and show off.
 
**Schedule a "Saturday Session" for a dyeing class to invite attendees back to.
*Have a session where we get people to assemble a cornhole board.
**Perhaps also have a session or workstation set up to let people sew their own cornhole bags.  Bonus points if we can set up a screen-printing item so that we can let people make cornhole bags and put the knox makers logo on them. 
*A demo on robots.  Perhaps we can reach out to the knox area robotics guys to do a presentation?
*Library Injection
*Library Injection
**Let's have some hacking! Demonstrate how you can intercept library calls from proprietary software and redirect them. Also show multiple examples of tools which used library interposition as their underlying method of operation. (RelativePrime)
**Let's have some hacking! Demonstrate how you can intercept library calls from proprietary software and redirect them. Also show multiple examples of tools which used library interposition as their underlying method of operation. (RelativePrime)
*Cracking password hashes with oclHashcat
**Presenter: Pete
**Explain how hashing algorithms work and are implemented in authentication schemes, and how such can be cracked with CPU / GPU based systems.
**Time: 3:00 PM
 
*[[Glasswork]]
**Project/presentation involves cutting glass bottles with a torch.
**Presenter: Nathaniel
**Time: 3:30 PM
 
*Flint-knapping
**Presenter: James's friend (James)
**Time: 4:00 PM
 
*Touchtable MK-II
**Presenter: Zach
**Time: 4:30 PM
 
*Below items were struck from the schedule, but may still be events in the future
 
**<s>A demo on robots.  Perhaps we can reach out to the knox area robotics guys to do a presentation?</s>
 
**<s>Cracking password hashes with oclHashcat</s>
***Explain how hashing algorithms work and are implemented in authentication schemes, and how such can be cracked with CPU / GPU based systems.
 
**<s>An Arduino-based presentation that would show some of the projects our members have already completed with Arduinos as well as show some great Arduino projects we know about on the internet. We would need someone to volunteer to develop/lead this seminar.</s> 
***I could get my PID controller demo put back together as a live demo.
***We should schedule another "Getting started with Arduino" class for later in the year to refer this session to.
***Maybe include other boards like the makey-makey.
 
**<s>A presentation on dyeing cloth.  I would volunteer to lead this presentation.</s>
***Show the process for making the acoustic panels.
***Explain/demo the cloth dyeing process.  It's possible that if I did this early enough that by the end the cloth would be rinsed well enough to hold up and show off.
***Schedule a "Saturday Session" for a dyeing class to invite attendees back to.
 
**<s>Have a session where we get people to assemble a cornhole board.</s>
***Perhaps also have a session or workstation set up to let people sew their own cornhole bags.  Bonus points if we can set up a screen-printing item so that we can let people make cornhole bags and put the knox makers logo on them.


==Ideas for potential all-day demos==
==Ideas for potential all-day demos==
*If the 3D printer is ready, have it be printing something as a demo.
*If the 3D printer is ready, have it be printing something as a demo.
*Have the vacuum forming equipment set up and prepared for kids to make a few masks.   
*Have the vacuum forming equipment set up and prepared for kids to make a few masks.   
**Have Oct. 2 be a plaster mold making class, where we make some more molds to take to ATL MMF.  Invite folks back for that.
**Have Oct. 2 be a plaster mold making class, where we make some more molds to take to ATL MMF.  Invite folks back for that.
**Presenter: Everyone who is capable as needed
**Future Date: Oct 2nd
<s>*James is going to look into having some of his friends do some flint-napping demos outside.</s> (added as presentation -James)
*Synth kit build (James)


==Awesome stretch project ideas==
==Awesome stretch project ideas==
Line 49: Line 84:


=Publicity=
=Publicity=
We didn't do quite as much brainstorming here, but here is what we have:
Our second session filled this topic out quite a bit.  We still have plenty of areas that need help.  Here is our brainstorming pad in very poor handwriting:
 
[[File:Notes 1.png|200px]]
[[File:Notes 2.png|200px]]
[[File:Notes 3.png|200px]]
 
==Media==
*General:
**organize/manage: shared Google doc (Andy to set up)
***keep media contact info out of public area.
**press release/media package
***list of articles wiki
****every major media link to hackerspaces/makerspaces
***Google Group Post
***Print copy
**personalized artifact 3D print?
*Outlet types
**Groups
***Knox Area Robotics
***Entrepreneurs of Knoxville (Adan)
**Print
***MetroPulse (Adan)
***News Sentinel (Adan)
***Oak Ridger
***Farragut
***Nuts n Volts
**Radio (Sam)
***WUTK
***WUOT
***WDVX
***WFIV
***WUOT
**TV (Sam)
***ABC6
***CBS8
***NBC10
**Web
***Make
***HaD
***Craigslist
***Reddit (Jess)
**Social
***FBook
***Twitter
***Google Group
 
==Posters==
1-2 posters, potentially print some with Repurposer's plotter maintenance program? Need ideas/follow-up.
 
==Flyers==
==Flyers==
Issac/James were going to look at making some drafts to review at the next session.  Feel free to contact them if you're interested in helping.
Issac/James were going to look at making some drafts to review at the next session.  Feel free to contact them if you're interested in helping.
*A flyer to advertise the Grand Opening Event itself.   
*A flyer to advertise the Grand Opening Event itself.   
**Plan to distibute 50-75 color flyers
**Plan to distribute ?? b/w flyers (James)
**It should give some indication of who we are, what hackerspaces are about, and indicate the sessions we have planned.
**It should give some indication of who we are, what hackerspaces are about, and indicate the sessions we have planned.
**Format: perhaps it should be bigger than 8.5x11
**Format: perhaps it should be bigger than 8.5x11
*Posting Locations:--[[User:Laz|Laz]] 23:46, 26 August 2012 (EDT)
*Posting Locations:--[[User:Laz|Laz]] 23:46, 26 August 2012 (EDT)
**Roadside signs (if legal: Sam inquiry)
**Local Technical Employers
**Local Technical Employers
***Siemens
***Siemens - Laz
***EPRI
***EPRI - Laz
**Schools
**Schools
***UT
***UT
***PSCC
***PSCC
***University of Phoenix - James [done]
**Local Businesses
**Local Businesses
***Shield's Electronics
***Shield's Electronics
***Radioshack?
***Radioshack (West Town)
 
***Radioshack (Oak Ridge)
***Radioshack (Clinton Hwy)
***WoodCraft - Adan [done]
***Tandy Leather - Adan [done]
***Petsafe - Laz
***[Mike's email]
***3 Rivers Market - Adan
***Tomato Head (Mkt Sq) - Adan [done]
***MoJoe's - Adan [done]
***UT Art/Architecture bldg - Adan
***BP Kingston & Lovell - James [done]
***Arts & Antiques (Lenoir City) - James [done]


*Event flyers to hand out at the presentations/teasers to advertise the full meeting event tied to the presentation
*Event flyers to hand out at the presentations/teasers to advertise the full meeting event tied to the presentation

Latest revision as of 00:25, 27 September 2012

Legal and Other

  • Will we need an event permit or other legal permission to host the event? Research needed.

Date and Time

  • Date set as September 29
  • Time proposed as 2-5pm

Menu

  • Without a reliable attendee estimate, we are uncomfortable planning to serve food of any substance.
  • We'll have coffee (supplied by Brad of Mojoe's)
  • We will have water and other drinks on hand. Request members volunteer to bring coolers & ice.
  • We should have some chips and snacks of some sort.

Events

We had tons of great brainstorming about events. We had thought of having about 6 twenty minutes talks. That would leave about 10 minutes for Q&A, presentation switch over, etc. That would be about 3 hours of presentation, and roughly an hour break for food. We really like the idea of letting people make/participate as much as possible. Best case ideas let people do things in the space. The next best thing would be to give people project instructions that they can take home. A fantastic idea was to connect our short presentations to a longer event already scheduled at one of our public meetings. We give them a tease, then encourage them to come back by showing them that the full presentation is on the calendar. This should do a great job of helping to bring people back to the space.

Ideas for potential 20 minute presentations/teasers

  • A raspberry pi presentation. We would need someone with a raspi to take point on this one and develop this talk.
    • Ideally, we could develop this into a longer presentation to put on the calendar to let us dig in deeper (and encourage attendees to return).
    • Presenter: Jess
    • Time: 2:00 PM
  • A KMBI presentation. Adan has volunteered to lead/present this presentation.
    • Include a recap of the boat building process.
    • Perhaps have some sort of scale demo to show off part of the process.
    • Hopefully have another boat in the queue and invite attendees back to one of the working sessions.
    • Presenter: Adan
    • Time: 2:30 PM
  • Library Injection
    • Let's have some hacking! Demonstrate how you can intercept library calls from proprietary software and redirect them. Also show multiple examples of tools which used library interposition as their underlying method of operation. (RelativePrime)
    • Presenter: Pete
    • Time: 3:00 PM
  • Glasswork
    • Project/presentation involves cutting glass bottles with a torch.
    • Presenter: Nathaniel
    • Time: 3:30 PM
  • Flint-knapping
    • Presenter: James's friend (James)
    • Time: 4:00 PM
  • Touchtable MK-II
    • Presenter: Zach
    • Time: 4:30 PM
  • Below items were struck from the schedule, but may still be events in the future
    • A demo on robots. Perhaps we can reach out to the knox area robotics guys to do a presentation?
    • Cracking password hashes with oclHashcat
      • Explain how hashing algorithms work and are implemented in authentication schemes, and how such can be cracked with CPU / GPU based systems.
    • An Arduino-based presentation that would show some of the projects our members have already completed with Arduinos as well as show some great Arduino projects we know about on the internet. We would need someone to volunteer to develop/lead this seminar.
      • I could get my PID controller demo put back together as a live demo.
      • We should schedule another "Getting started with Arduino" class for later in the year to refer this session to.
      • Maybe include other boards like the makey-makey.
    • A presentation on dyeing cloth. I would volunteer to lead this presentation.
      • Show the process for making the acoustic panels.
      • Explain/demo the cloth dyeing process. It's possible that if I did this early enough that by the end the cloth would be rinsed well enough to hold up and show off.
      • Schedule a "Saturday Session" for a dyeing class to invite attendees back to.
    • Have a session where we get people to assemble a cornhole board.
      • Perhaps also have a session or workstation set up to let people sew their own cornhole bags. Bonus points if we can set up a screen-printing item so that we can let people make cornhole bags and put the knox makers logo on them.

Ideas for potential all-day demos

  • If the 3D printer is ready, have it be printing something as a demo.
  • Have the vacuum forming equipment set up and prepared for kids to make a few masks.
    • Have Oct. 2 be a plaster mold making class, where we make some more molds to take to ATL MMF. Invite folks back for that.
    • Presenter: Everyone who is capable as needed
    • Future Date: Oct 2nd

*James is going to look into having some of his friends do some flint-napping demos outside. (added as presentation -James)

  • Synth kit build (James)

Awesome stretch project ideas

  • M.U.G.E.N. - James is going to look into the possibility of doing some green-screen work to get be able to put pictures of attendees into a 2-d fighting game. (edit 8/24/12, James: http://www.elecbyte.com/mugen It will take me awhile to figure this one out, after taking a closer look. I doubt I'd have anything by the Grand Opening. If anyone has experience with M.U.G.E.N. or similar, though..) We'll come back to this one at a later time. Still a great idea. --Laz 23:13, 26 August 2012 (EDT)
  • DIY Air-hockey table - Mike is going to look into the feasibility of a DIY air hockey table.
  • Rubens Tube - Issac is going to bring a Rubens tube to see if we can get it working safely enough to set up as a possible demo. Use the function generators to show some awesome waves.

Publicity

Our second session filled this topic out quite a bit. We still have plenty of areas that need help. Here is our brainstorming pad in very poor handwriting:

Error creating thumbnail: File missing
Error creating thumbnail: File missing
Error creating thumbnail: File missing

Media

  • General:
    • organize/manage: shared Google doc (Andy to set up)
      • keep media contact info out of public area.
    • press release/media package
      • list of articles wiki
        • every major media link to hackerspaces/makerspaces
      • Google Group Post
      • Print copy
    • personalized artifact 3D print?
  • Outlet types
    • Groups
      • Knox Area Robotics
      • Entrepreneurs of Knoxville (Adan)
    • Print
      • MetroPulse (Adan)
      • News Sentinel (Adan)
      • Oak Ridger
      • Farragut
      • Nuts n Volts
    • Radio (Sam)
      • WUTK
      • WUOT
      • WDVX
      • WFIV
      • WUOT
    • TV (Sam)
      • ABC6
      • CBS8
      • NBC10
    • Web
      • Make
      • HaD
      • Craigslist
      • Reddit (Jess)
    • Social
      • FBook
      • Twitter
      • Google Group

Posters

1-2 posters, potentially print some with Repurposer's plotter maintenance program? Need ideas/follow-up.

Flyers

Issac/James were going to look at making some drafts to review at the next session. Feel free to contact them if you're interested in helping.

  • A flyer to advertise the Grand Opening Event itself.
    • Plan to distibute 50-75 color flyers
    • Plan to distribute ?? b/w flyers (James)
    • It should give some indication of who we are, what hackerspaces are about, and indicate the sessions we have planned.
    • Format: perhaps it should be bigger than 8.5x11
  • Posting Locations:--Laz 23:46, 26 August 2012 (EDT)
    • Roadside signs (if legal: Sam inquiry)
    • Local Technical Employers
      • Siemens - Laz
      • EPRI - Laz
    • Schools
      • UT
      • PSCC
      • University of Phoenix - James [done]
    • Local Businesses
      • Shield's Electronics
      • Radioshack (West Town)
      • Radioshack (Oak Ridge)
      • Radioshack (Clinton Hwy)
      • WoodCraft - Adan [done]
      • Tandy Leather - Adan [done]
      • Petsafe - Laz
      • [Mike's email]
      • 3 Rivers Market - Adan
      • Tomato Head (Mkt Sq) - Adan [done]
      • MoJoe's - Adan [done]
      • UT Art/Architecture bldg - Adan
      • BP Kingston & Lovell - James [done]
      • Arts & Antiques (Lenoir City) - James [done]
  • Event flyers to hand out at the presentations/teasers to advertise the full meeting event tied to the presentation
    • Each of these event level flyers should have a small box with our full planned calendar with other events. (This means planning out the calendar for the next few months in advance)

Advertising

  • We need to at least be in the free events calendars in the local papers:
    • Metropulse
    • Sentinel
    • Oak Ridger?
  • We need to prepare an article for makerspace happenings and/or make blog. Example: http://blog.makezine.com/2012/08/22/port-city-makerspace-grand-opening/
  • We should try to reach out and make contact with Metropulse to see if we can interest them in a story on the maker movement and/or our space.
  • We should reach out to other groups that might have a collection of nerdy types:
    • Entrepreneurs of Knoxville (Originally the guys who wanted a techshop in knoxville)
    • Knox Area Robotics Club