Group Buy

Next Group Buy targeted for 2015-01-01

Sam

• Adafruit Audio FX Sound Board 16MB - Qty 1 [[1]] - $29.95 $20.97
• USB Charger Doctor In-line Voltage and Current Meter - Qty 1 [[2]] - $7.50 $5.25
• MaKey MaKey - Qty 1 [[3]] - $49.95 x 1 = $49.95

Subtotal: $87.40 $76.17 => $77

Butch

• Adafruit TSL2591 Light Sensor - Qty 1 [[4]] - $6.95 $4.87
• 36-pin 0.1" Female header - Qty 2 [[5]] - $2.95 $2.10 x2 = $5.90 $4.20
• Adafruit Pro Trinket 5V - Qty 1 [[6]] - $9.95 $6.97
• Adafruit Pro Trinket 3V - Qty 1 [[7]] - $9.95 $6.97

Subtotal: $32.75 $23.01 => $23

Issac

• 2x laser cutter sticker @ $1.50 = $3.00 [[8]]
• 1x Copper foil tape with conductive adhesive – 6mm x 15 meter roll @ $5.95 $4.20 = $5.95 $4.20 [[9]]
• 2x Adafruit 12-Key Capacitive Touch Sensor Breakout – MPR121 @ $7.95 $5.57 = $15.90 $11.14 [[10]]
• 4x GPIO Header for Raspberry Pi A+/B+ - 2x20 Female Header @ $1.50 $1.05 = $6.00 $4.20 [[11]]
• 1x Adafruit GPIO Reference Card for Raspberry Pi Model B+ @ $2.50 $1.75 = $2.50 $1.75 [[12]]
• 8x 3.3V 250mA Linear Voltage Regulator - L4931-3.3 TO-92 @ $0.95 $0.65 = $7.60 $5.20 [[13]]
• 1x ITO (Indium Tin Oxide) Coated PET Plastic - 100mm x 200mm @ $9.95 $7.00 = $9.95 $7.00 [[14]]
• 1x Flex PCB Material - Pyralux - 6" by 6" Square @ $8.95 $6.30 = $8.95 $6.30 [[15]]

Subtotal: $59.85 $42.79 => $43

James

• Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft - Qty 1 [[16]] - $5.95 $4.20
• Pressure-Sensitive Conductive Sheet (Velostat/Linqstat) - Qty 1 [[17]] - $3.95 $2.80
• Conductive Fiber - Stainless Steel 20um - 10 grams - Qty 2 [[18]] - $2.95 $2.10 X 2 = $5.90 $4.20
• Premium Male/Male Jumper Wires - 40 x 6" (150mm) - Qty 2 [[19]] - $3.95 $2.77 X 2 = $7.90 $5.54
• Cold Splice Wire Tap (UB) - 10 pack - Qty 4 [[20]] - $2.95 $2.10 X 4 = $11.80 $8.40
• Tactile Button switch (6mm) x 20 pack - Qty 2 [[21]] - $2.50 $1.75 X 2 = $5.00 $3.50
• Adafruit LED Sequins - Warm White - Pack of 5 - Qty 1 [[22]] - $3.95 $2.80
• Adafruit LED Sequins - Royal Blue - Pack of 5 - Qty 1 [[23]] - $3.95 $2.80
• Adafruit LED Sequins - Ruby Red - Pack of 5 - Qty 1 [[24]] - $3.95 $2.80
• Adafruit LED Sequins - Emerald Green - Pack of 5 - Qty 1 [[25]] - $3.95 $2.80
• Diffused Red 5mm LED (25 pack) - Qty 1 [[26]] - $4.00 $2.80
• Diffused Green 5mm LED (25 pack) - Qty 1 [[27]] - $4.00 $2.80
• Diffused 5mm Slow Fade Flashing RGB LED - 10 pack - Slow fade - Qty 1 [[28]] - $4.95 $3.50
• Diffused 5mm Fast Flashing RGB LED - 10 pack - Flashing Effect - Qty 1 [[29]] - $4.95 $3.50
• UV/UVA 400nm Purple LED 5mm Clear Lens - 10 pack - Qty 1 [[30]] - $4.95 $3.50
• White LED Backlight Module - Small 12mm x 40mm - Qty 4 [[31]] - $1.95 $1.40 X 4 = $7.80 $5.60
• Premium Female/Female Jumper Wires - 40 x 6" - Qty 4 [[32]] - $3.95 X 4 = $15.80 $9.88

Subtotal: $102.75 $71.42 => $72

Makhan

• Flex Cable for Raspberry Pi Camera - 1 meter - Qty 1 [[33]] - $3.95 $2.77
• Adafruit 50 pin 0.5mm pitch FPC Adapter - Qty 2 [[34]] - $2.95 x2 = $5.90 $4.20
• Inductive Charging Set - 5V @ 500mA max - Qty 1 [[35]] - $9.95 $7.00
• 50-pin 0.5mm pitch top-contact FPC SMT Connector - Qty 2 [[36]] - $1.95 x 2 = $3.90 $2.80
• TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch - Qty 1 [[37]] - $29.95 $20.97
• 5.0" 40-pin TFT Display - 800x480 with Touchscreen - Qty 1 [[38]] - $39.95 $28.00
• IDC Breadboard Helper - 2x16 (32 pin) - Qty 1 [[39]] - $1.95 $1.35
• 50-pin 0.5mm Pitch FPC Flex Cable - 250mm / 10" long - Qty 1 [[40]] - $1.95 $1.40
• Adafruit FPC Stick - 20 Pin 0.5mm/1.0mm Pitch Adapter - Qty 2 [[41]] - $1.95 x 2 = $3.90 $2.70
• ITO (Indium Tin Oxide) Coated PET Plastic - 100mm x 200mm - Qty 1 [[42]] - $9.95 $7.00 = $9.95 $7.00

Subtotal: $111.35

Laz

• RPi - Qty 1 [[43]] - 39.95 x2 = 79.90
• Bluetooth Module - Qty 2 [[44]] - 10.95 $7.70 x2 = $21.90 $15.40
• Flex Cable for RPi Camera - 1 meter - Qty 1 [[45]] - $3.95 $2.77
• RPi Camera Board - Qty 1 [[46]] - 29.95
• 5V 2A Power Supply with MicroUSB Cable - Qty 1 [[47]] - $7.95 $6.40
• MCP3008 - 8 Channel ADC - Qty 4 [[48]] - $3.75 $2.63*4 = $15.00 $10.52
• GPIO Header for RPi B+ - Qty 4 [[49]] - $2.95 $2.07*4= $11.80 $8.28
• 10k Precision Epoxy Thermistor - Qty 4 [[50]] - $4.00 $2.80*4=$16.00 $11.20
• Ic Socket, 16 pin - Qty 2 [[51]] - $0.95 $0.67*2 = $1.90 $1.34
• N Channel MOSFET - Qty 10 [[52]] - $1.75 $1.25*10 = $17.50$12.50
• USBtinyISP AVR Programmer Kit (USB SpokePOV Dongle) - v2.0 - Qty 1[[53]] $22.00 $15.40
• SpokePOV Kit - v1.1 - Red - Qty 3 [[54]] $37.50 $26.25 *3 = 112.50$78.75
• Miniature WiFi (802.11b/g/n) Module - Qty 1 [[55]] 11.95,8.40
• 4GB SD Card - Qty 1 [[56]] 7.95,5.60
• 5V Power Supply - Qty 1 [[57]] 7.95,6.40

Subtotal: Pending

Justin

• EL Wire Starter Pack Aqua - Qty 1 [[58]] - $19.95 $14.00
• EL Tape Starter Pack Green - Qty 1 [[59]] - $19.95 $14.00
• Litex White LEDs on Black Fabric - Qty 1 [[60]] - $14.95

Subtotal $54.85 $42.95 => $43

Jondale

• Adafruit NeoPixel Digital RGB LED Strip - Black 30 LED - 1m - BLACK - Qty 5 [[61]] - $16.95 $11.90 *5

Subtotal: $84.75 $59.50 => $60

Fitz

• Micro servo PID: 169 - Qty 4 - $5.95 $4.50 x4 =$23.80 $18.00
• Arduino Uno R3 (Atmega328 - assembled) PID: 50 - Qty 1 - $24.95
• Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3 PID: 1438 - Qty 1 - $19.95 $14.00
• Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA PID: 324 - Qty 2 - $14.00 $9.80 x2 =$28.00 $19.60
• Stepper Motor Mount with Hardware - NEMA-17 Sized PID: 1297 - Qty 2 - $8.95 $6.30 x2 =$17.90 $12.60
• VERTER 5V USB Buck-Boost - 500mA from 3V-5V / 1000ma from 5V-12V PID: 2190 - Qty 1 - $9.95 $6.97

Subtotal $124.55 $96.12 => $97