Laser Cutter

From Knox Makers Wiki
Revision as of 00:34, 20 October 2012 by Andronicus (talk | contribs)
Jump to navigation Jump to search

http://www.buildlog.net/wiki/doku.php?id=2x:2.x_laser

To Do List

Buy/build shaft couplers for y-axis

Buy honeycomb surface

Buy large z-axis gear

Buy Pololu motor drivers

Specify limit switches

Buy limit switches

Cut 1/4" aluminum rod stock to 12" & 14" sections for y-axis shafts

Machine air assist nozzle

Build roll around table

Determine electronics setup