Prusa Mendel: Difference between revisions

From Knox Makers Wiki
Jump to navigation Jump to search
Line 11: Line 11:


====Temperature Sensors====
====Temperature Sensors====
* Hot-End: Thermistor 100K B57560G104F http://ultimachine.com/content/thermistor-100k http://reprap.org/wiki/Thermistor#EPCOS_100K_Thermistor_.28B57560G1104F.29
* Hot-End?: Thermistor 100K B57560G1104F ordered from http://ultimachine.com/content/thermistor-100k  
* Heated Bed: Thermistor 100K B57560G104F
* Heated Bed?: Thermistor 100K B57560G104F ordered with J-Head Nozzle


{| border="1"
|'''Supplier'''
|'''Part Number'''
|-
|Digi-Key
|495-2125-ND
|-
|Mouser
|871-B57540G104F
|}
* Rz: 348394
* Temperature rating: -55 degC ~ 200 degC
<pre>
// EPCOS 100K Thermistor (B57540G0104F000)
// Thermistor lookup table for RepRap Temperature Sensor Boards (http://make.rrrf.org/ts)
// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
// r0: 100000
// t0: 25
// r1: 0
// r2: 4700
// beta: 4066
// max adc: 1023
#define NUMTEMPS 20
short temptable[NUMTEMPS][2] = {
  {1, 841},
  {54, 255},
  {107, 209},
  {160, 184},
  {213, 166},
  {266, 153},
  {319, 142},
  {372, 132},
  {425, 124},
  {478, 116},
  {531, 108},
  {584, 101},
  {637, 93},
  {690, 86},
  {743, 78},
  {796, 70},
  {849, 61},
  {902, 50},
  {955, 34},
  {1008, 3}
};
</pre>
<br clear="all"/>


{| border="1"
{| border="1"

Revision as of 17:01, 21 October 2012

Setup

Hardware

Hot-End

Heated Bed

Temperature Sensors

Supplier Part Number
Digi-Key 495-2125-ND
Mouser 871-B57540G104F
  • Rz: 348394
  • Temperature rating: -55 degC ~ 200 degC
// EPCOS 100K Thermistor (B57540G0104F000)
// Thermistor lookup table for RepRap Temperature Sensor Boards (http://make.rrrf.org/ts)
// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
// r0: 100000
// t0: 25
// r1: 0
// r2: 4700
// beta: 4066
// max adc: 1023
#define NUMTEMPS 20
short temptable[NUMTEMPS][2] = {
   {1, 841},
   {54, 255},
   {107, 209},
   {160, 184},
   {213, 166},
   {266, 153},
   {319, 142},
   {372, 132},
   {425, 124},
   {478, 116},
   {531, 108},
   {584, 101},
   {637, 93},
   {690, 86},
   {743, 78},
   {796, 70},
   {849, 61},
   {902, 50},
   {955, 34},
   {1008, 3}
};


Supplier Part Number
Farnell 1791917
Mouser 871-B57560G1104F000
// EPCOS 100K Thermistor (B57560G1104F)
// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4092 --max-adc=1023
// r0: 100000
// t0: 25
// r1: 0
// r2: 4700
// beta: 4092
// max adc: 1023
#define NUMTEMPS 20
short temptable[NUMTEMPS][2] = {
   {1, 821},
   {54, 252},
   {107, 207},
   {160, 182},
   {213, 165},
   {266, 152},
   {319, 141},
   {372, 131},
   {425, 123},
   {478, 115},
   {531, 107},
   {584, 100},
   {637, 93},
   {690, 86},
   {743, 78},
   {796, 70},
   {849, 60},
   {902, 49},
   {955, 34},
   {1008, 3}
};


Firmware

Software