Using Inkscape with the Laser Cutter: Difference between revisions

From Knox Makers Wiki
Jump to navigation Jump to search
No edit summary
Line 29: Line 29:


[http://youtu.be/m8iAdZxmLXI Resizing your Design]
[http://youtu.be/m8iAdZxmLXI Resizing your Design]


==KMLaser Bundle==
==KMLaser Bundle==

Revision as of 19:05, 12 October 2014

This page should be a tutorial on how to use our Inkscape Plugin, with screen shots, directions, caveats, etc.

Link back to Laser Cutter.

Inkscape Basics

Once you have created your design you'll want to make sure all your objects are paths so all your extensions will work with them. You can do CTRL+A to select everything then use the method in the video.

Make sure your objects are paths.


You'll also need to either move your design to 0,0 or resize the document to match your design (which essentially moves it to 0,0). This way you can more accurately predict where the laser will start cutting.

Resize your document to match your design.

Move your design to 0,0


From time to time you'll end up with designs in the (root) layer instead of an actual named layer. You'll need to fix this before turning your design to gcode. You can just cut and paste it into an actual layer as the video shows. Once there is nothing in the (root) it will go away.

Fix designs with (root) layers


Setting the stroke color of the paths you want to cut/engrave will be important when you want different laser settings in one design (both engrave and cut for example).

Setting the stroke color


Sizing your designs to the desired size will be important. Here is a video on how to do that while keeping everything aligned and keeping the aspect ratio.

Resizing your Design


KMLaser Bundle

We've put together a bundle of Inkscape extensions that you might find useful. You can download the bundle at our github.


Path to Gcode

This extension is the work horse for the bundle. It takes the paths from your design and turns them into gcode required to run our laser cutter. This extension is based on part of Gcodetools but has been heavily altered for our purposes.


Hatch Fill

This extension allows you to fill in any closed figure in your design with lines or crossed lines. This is useful when you want to engrave an entire area within your design. This extension is based on part of the eggbot extensions.


Hershey Text

Hershey Text produces single-stroke text that is appropriate for cnc engraving or plotters. This extension is based on part of the eggbot extensions.


Tabbed Box Maker

This extension creates the paths necessary to cut out tabbed boxes. This extension is based of the extension you can find here.