Vinyl Cutter: Difference between revisions

From Knox Makers Wiki
Jump to navigation Jump to search
(Created page with "== Machine == USCutter SC2 34" 200px == Consumables == The vinyl cutter uses any standard Roland style blade. It is usually equipped with a 45 deg...")
 
No edit summary
Line 3: Line 3:
34"
34"


[[File:Uscuttersc2.jpg|200px]]
[[File:Uscuttersc2.jpg|400px]]
 
 
== Controls ==
[[File:vinyl-cutter-controls.jpg|400px]]
 
LOCAL/PAUSE: Changes from ONLINE and PAUSE modes
 
ORIGIN: Sets the origin or home position to the carriages current position
 
ARROW KEYS: Changes speed and pressure when in online mode and moves carriage while in pause mode


== Consumables ==  
== Consumables ==  

Revision as of 16:04, 3 March 2021

Machine

USCutter SC2 34"

Uscuttersc2.jpg


Controls

Vinyl-cutter-controls.jpg

LOCAL/PAUSE: Changes from ONLINE and PAUSE modes

ORIGIN: Sets the origin or home position to the carriages current position

ARROW KEYS: Changes speed and pressure when in online mode and moves carriage while in pause mode

Consumables

The vinyl cutter uses any standard Roland style blade. It is usually equipped with a 45 degree angle blade for general usage.

https://uscutter.com/3-Pack-Of-Roland-Cemented-Carbide-Blades-45-Degrees/

The blade holder can be replaced here:

https://uscutter.com/Blade-Holder-For-Sc-Sc2-Lpii-Laserpoint-3/


Software

You can send your designs to the vinyl cutter directly from Inkscape by using the Plot extension. You can access it by following the menus: Extensions > Export > Plot...

The default settings work but you might need to set the Serial Port the Vinyl cutter is assigned on your computer.

Vinyl-101-settings.png