Main public logs
From Knox Makers Wiki
Combined display of all available logs of Knox Makers Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 03:32, 20 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 50 (Created page with " Back to Tool Library ==Tool 50 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.2500 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 50 |- | '''Tool Type''' || Bowl & Tray Bit |- | '''Shank Size''' || 1/2" |- | '''Diameter''' || 1-1/4" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.2500" |- | '''Length of Cut (LOC)''' || 0.5000" |- | '''Max RPM''' || 18,000 |- | '''Material'...")
- 03:31, 20 December 2024 Billy talk contribs deleted page Nibblerbot/tools/tool 50 (content was: " Back to Tool Library ==Tool 50 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.2500 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 50 |- | '''Tool Type''' || Bowl & Tray Bit |- | '''Shank Size''' || 1/2" |- | '''Diameter''' || 1-1/4" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.2...", and the only contributor was "Billy1" (talk))
- 03:31, 20 December 2024 Jondale talk contribs changed group membership for Billy1: granted administrator
- 02:19, 20 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 50 (Created page with " Back to Tool Library ==Tool 50 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.2500 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 50 |- | '''Tool Type''' || Bowl & Tray Bit |- | '''Shank Size''' || 1/2" |- | '''Diameter''' || 1-1/4" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.2500" |- | '''Length of Cut (LOC)''' || 0.5000" |- | '''Max RPM''' || 18,000 |- | '''Material'...")
- 02:19, 20 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 20 (Created page with " Back to Tool Library ==Tool 20 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.2500 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 20 |- | '''Tool Type''' || Bowl & Tray Bit |- | '''Shank Size''' || 1/2" |- | '''Diameter''' || 1-1/4" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.2500" |- | '''Length of Cut (LOC)''' || 0.5000" |- | '''Max RPM''' || 18,000 |- | '''Material'...")
- 03:15, 19 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 17 (Created page with " Back to Tool Library ==Tool 17 - 1-1/4" Bowl & Tray Bit 0.500 loc 2.2500 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 17 |- | '''Tool Type''' || Bowl & Tray Bit |- | '''Shank Size''' || 1/2" |- | '''Diameter''' || 5/4" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.2500" |- | '''Length of Cut (LOC)''' || 0.5000" |- | '''Max RPM''' || 18,000 |- | '''Materi...")
- 18:02, 16 December 2024 Rhubarb talk contribs created page File:How To 3D Print - Extrusion - Step 2 - Choose Printer.png
- 18:02, 16 December 2024 Rhubarb talk contribs uploaded File:How To 3D Print - Extrusion - Step 2 - Choose Printer.png
- 17:57, 16 December 2024 Rhubarb talk contribs created page File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png
- 17:57, 16 December 2024 Rhubarb talk contribs uploaded File:How To 3D Print - Extrusion - Step 1 - Choose Filament.png
- 17:52, 16 December 2024 Rhubarb talk contribs created page 3D Printing - How To Print Extrusion Style (Created page with "This page is meant to give details on how to print using the Extrusion style printers (often referred to as FDM or Fused Deposition Modeling). = Step 1: Choose a Filament = = Step 2: Choose a Printer = = Step 3: Prep Your MacGuffin = Follow the steps outlined corresponding to your chosen printer (from Step 2) == XL == == Ender == == Prusa Mk 3 == = Step 4: Prep and Print = Follow the steps outlined corresponding to your chosen printer (from Step 2) == XL == == Ender ==...")
- 06:36, 14 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 22 (Created page with " ==Tool 22 - 2" Spoil Board Bit== {| class="wikitable" |- ! style="width: 200px;" | Attribute !! style="width: 400px;" | Details |- | '''Tool #''' || 22 |- | '''Tool Type''' || Spoil Board Bit |- | '''Flutes (FL)''' || 4 |- | '''Overall Length (OAL)''' || 2.500" |- | '''Length of Cut (LOC)''' || 0.500" |- | '''Max RPM''' || 12,000 |- | '''Diameter''' || 2" |- | '''Material''' || Brazed Carbide |- | '''Coating''' || None |- | '''Part Number''' || B07VCZVKL7 |- | '''Manufa...")
- 03:10, 14 December 2024 Jondale talk contribs created page Test bot Page (Created page with "<br/>Appending this text")
- 02:59, 14 December 2024 Jondale talk contribs created page Knox Makers Wiki:Sandbox (Created page with "Hello")
- 21:28, 13 December 2024 Jondale talk contribs created page Test bot page (Created page with "watwat")
- 01:30, 12 December 2024 Billy talk contribs created page Nibblerbot/tools (Created page with "[http://Nibblerbot/tools/tool%2010 Nibblerbot/tools/tool 10] [http://Nibblerbot/tools/tool%2011 Nibblerbot/tools/tool 11] [http://Nibblerbot/tools/tool%2012 Nibblerbot/tools/tool 12] [http://Nibblerbot/tools/tool%2013 Nibblerbot/tools/tool 13] [http://Nibblerbot/tools/tool%2014 Nibblerbot/tools/tool 14] [http://Nibblerbot/tools/tool%2015 Nibblerbot/tools/tool 15] [http://Nibblerbot/tools/tool%2016 Nibblerbot/tools/tool 16]")
- 01:27, 12 December 2024 Billy talk contribs uploaded a new version of File:Tool 99.png
- 23:49, 11 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 16 (Created page with " ==Tool 16 - 1/4" 2 Flute Compression End Mill== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 16 |- | '''Tool Type''' || Compression End Mill |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.500" |- | '''Length of Cut (LOC)''' || 1.000" |- | '''Max RPM''' || 24,000 |- | '''Diameter''' || 1/4" |- | '''Material''' || Carbide |- | '''Coating''' || AstraHP |- | '''Part Number''' || 425-CM250 |...")
- 23:48, 11 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 15 (Created page with " ==Tool 15 - 1/2" 2 Flute Compression End Mill== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 15 |- | '''Tool Type''' || Compression End MIll |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 4.000" |- | '''Length of Cut (LOC)''' || 1.500" |- | '''Max RPM''' || 24,000 |- | '''Diameter''' || 1/2" |- | '''Material''' || Carbide |- | '''Coating''' || NARCO |- | '''Part Number''' || E204 |- | '''...")
- 23:48, 11 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 14 (Created page with " ==Tool 14 - 2" Spoil Board Bit== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 14 |- | '''Tool Type''' || Spoil Board Bit |- | '''Flutes (FL)''' || 4 |- | '''Overall Length (OAL)''' || 2.500" |- | '''Length of Cut (LOC)''' || 0.500" |- | '''Max RPM''' || 12,000 |- | '''Diameter''' || 2" |- | '''Material''' || Brazed Carbide |- | '''Coating''' || None |- | '''Part Number''' || B07VCZVKL7 |- | '''Manufactur...")
- 23:48, 11 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 13 (Created page with " ==Tool 13 - 1/4" 2 Flute Compression End Mill== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 13 |- | '''Tool Type''' || Compression End Mill |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.500" |- | '''Length of Cut (LOC)''' || 1.000" |- | '''Max RPM''' || 24,000 |- | '''Diameter''' || 1/4" |- | '''Material''' || Carbide |- | '''Coating''' || None |- | '''Part Number''' || UD2102 |- | ''...")
- 23:47, 11 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 12 (Created page with " ==Tool 12 - 1/4" 2 Flute Upcut End Mill== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 12 |- | '''Tool Type''' || Upcut End Mill |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.500" |- | '''Length of Cut (LOC)''' || 0.750" |- | '''Max RPM''' || 24,000 |- | '''Diameter''' || 1/4" |- | '''Material''' || Carbide |- | '''Coating''' || None |- | '''Part Number''' || RU2075 |- | '''Manufacture...")
- 23:47, 11 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 10 (Created page with " ==Tool 10 - 1/2" 90° V-Groove Bit == {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 10 |- | '''Tool Type''' || V-Groove Bit |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 1.875" |- | '''Length of Cut (LOC)''' || 0.250" |- | '''Max RPM''' || 24,000 |- | '''Diameter''' || 1/2" |- | '''Material''' || Carbide |- | '''Coating''' || None |- | '''Part Number''' || 1502 |- | '''Manufacturer''' ||...")
- 20:04, 11 December 2024 User account Test3 talk contribs was created automatically
- 07:22, 11 December 2024 Billy talk contribs created page Nibblerbot/tools/tool 99 (Created page with "==Tool 99 - Wired Touch Probe == {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool Type''' || Touch Probe |- | '''Flutes (FL)''' || N/A |- | '''Overall Length (OAL)''' || N/A |- | '''Length of Cut (LOC)''' || N/A |- | '''Diameter''' || 2mm Ø - Tip |- | '''Material''' || N/A |- | '''Coating''' || N/A |- | '''Tool #''' || 99 |- | '''Manufacturer''' || PGFUN |- | '''Image or CAD''' || thumb |- | ''...")
- 07:21, 11 December 2024 Billy talk contribs created page File:Tool 99.png
- 07:21, 11 December 2024 Billy talk contribs uploaded File:Tool 99.png
- 06:45, 10 December 2024 Billy talk contribs created page Nibblerbot/tools/tool template (Created page with "==Tool [Tool #] - [Tool Name]== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool Type''' || [Type] (e.g., Endmill, Drill Bit, Ball Nose, Touch Probe, etc.) |- | '''Flutes (FL)''' || [Number of Flutes] |- | '''Overall Length (OAL)''' || [Overall Length in mm/inches] |- | '''Length of Cut (LOC)''' || [Length of Cut in mm/inches] |- | '''Diameter''' || [Tool Diameter in mm/inches] |- | '''Material''' || [Tool Material,...")
- 15:37, 5 December 2024 Jondale talk contribs created page 2025 Ballot (Created page with "__FORCETOC__ =About= Due to success of online voting in the past and to promote voting access to more members, the 2025 Annual Members Vote will be held online. The virtual voting process will be similar to the previous years with some minor differences to ballot activation and timeline. =Goals= * Enable members to cast one vote online. * Allow voters to confirm they have voted. * Remove identifying information from votes. * Produce voting results. =Process= # The vot...")
- 03:11, 3 October 2024 Dllh talk contribs uploaded a new version of File:Dross Skimmer.jpg
- 03:05, 3 October 2024 Dllh talk contribs created page File:Dross Skimmer.jpg
- 03:05, 3 October 2024 Dllh talk contribs uploaded File:Dross Skimmer.jpg
- 03:05, 3 October 2024 Dllh talk contribs created page File:Dross Bin.jpg
- 03:05, 3 October 2024 Dllh talk contribs uploaded File:Dross Bin.jpg
- 18:41, 1 October 2024 Jondale talk contribs created page File:Jig-top.svg
- 18:41, 1 October 2024 Jondale talk contribs uploaded File:Jig-top.svg
- 18:35, 1 October 2024 Jondale talk contribs created page File:Laserbotjig.jpg
- 18:35, 1 October 2024 Jondale talk contribs uploaded File:Laserbotjig.jpg
- 12:44, 1 October 2024 Sue talk contribs created page File:Ways to pay v2.pdf (the pdf version)
- 12:44, 1 October 2024 Sue talk contribs uploaded File:Ways to pay v2.pdf (the pdf version)
- 12:42, 1 October 2024 Sue talk contribs created page File:Ways to Pay v2.pdf
- 12:42, 1 October 2024 Sue talk contribs uploaded File:Ways to Pay v2.pdf
- 03:03, 30 September 2024 Dllh talk contribs created page File:The mold completed.jpg
- 03:03, 30 September 2024 Dllh talk contribs uploaded File:The mold completed.jpg
- 03:02, 30 September 2024 Jondale talk contribs created page MC Etcher (Created page with "300px MC Etcher, a laser bot.")
- 03:02, 30 September 2024 Dllh talk contribs created page File:A sand-filled frame with mold pressing up into underside.jpg
- 03:02, 30 September 2024 Dllh talk contribs uploaded File:A sand-filled frame with mold pressing up into underside.jpg
- 03:01, 30 September 2024 Jondale talk contribs created page File:Laserbottable.jpg
- 03:01, 30 September 2024 Jondale talk contribs uploaded File:Laserbottable.jpg
- 03:01, 30 September 2024 Dllh talk contribs created page File:Ramming sand into the frame.jpg
