New pages

From Knox Makers Wiki
New pages
Hide bots | Show redirects

17 May 2026

  • 19:0819:08, 17 May 2026 BoardMeeting202605 (hist | edit) [2,922 bytes] Tracy (talk | contribs) (Created page with " === Minutes === May 17, 2026 virtually via Big Blue Button * Start time: 4:00 PM * Attendance: Issac M., Sue J., Jondale S., Tracy H., Billy H., Sean S., Russell P * Twelve general members also in attendance Votes - none Meeting end: 4:47 PM === Supplemental Notes === ==== Issac: President ==== ==== Sue: Treasurer ==== ==== Tracy: Membership Director ==== ==== Russell: Community Director ==== ==== Jondale: Tech Director ==== ==== Daryl: Communications...")

8 May 2026

30 April 2026

19 April 2026

  • 20:4820:48, 19 April 2026 BoardMeeting202604 (hist | edit) [2,257 bytes] Tracy (talk | contribs) (Created page with " === Minutes === April 19, 2026 virtually via Big Blue Button * Start time: 4:00 PM * Attendance: Issac M., Sue J., Jondale S., Tracy H., Billy H., Sean S., Russell P * Twelve general members also in attendance Votes - none Meeting end: 4:47 PM === Supplemental Notes === ==== Issac: President ==== * Spark news - very productive meeting last week with their entire board - He is crossing his fingers that he will have a good announcement for us very soon * Dogwood Art...") Tag: Visual edit

12 April 2026

7 April 2026

15 March 2026

  • 18:0918:09, 15 March 2026 BoardMeeting202603 (hist | edit) [3,298 bytes] Tracy (talk | contribs) (Created page with " === Minutes === February 15, 2026 virtually via Big Blue Button * Start time: 4:00 PM * Attendance: Issac M., Sue J., Jondale S., Tracy H., Billy H., Daryl H., Sean S. * Ten general members also in attendance Votes Meeting end: 5:45 PM === Supplemental Notes === ==== Issac: President ==== ==== Sue: Treasurer ==== ==== Tracy: Membership Director ==== ==== Russell: Community Director ==== ==== Jondale: Tech Director ==== ==== Daryl: Communications ==== ==...")

14 March 2026

12 March 2026

  • 18:2318:23, 12 March 2026 FlySky Configuration (hist | edit) [3,645 bytes] larry (talk | contribs) (Created page with "{| class="wikitable" |+ !Function !Description !Steps !Video |- |Factory Reset |If you're using one of the shop controllers for the first time you may wish to factory reset it in order to clear the previous user's customizations. '''** BEFORE proceeding review the Bind Transmitter and Receiver section below! If you don't have a Binding Plug you may not be able to re-connect your Transmitter and Receiver!''' | # Turn on the transmitter. # Press and hold the OK button to e...") Tag: Visual edit: Switched

2 March 2026

  • 00:5900:59, 2 March 2026 Nibblerbot/tools/tool 72 (hist | edit) [1,345 bytes] Billy1 (talk | contribs) (Created page with " Back to Tool Library ==Tool 72 - 1" Bowl & Tray Bit 0.750 loc 2.000 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 72 |- | '''Tool Type''' || Bowl & Tray Bit |- | '''Shank Size''' || 1/4" |- | '''Diameter''' || 1" |- | '''Corner Radius''' || 3/8" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.0000" |- | '''Length of Cut (LOC)''' || 0.7500" |- | '''Max RPM''' ||...")
  • 00:4100:41, 2 March 2026 Nibblerbot/tools/tool 14 (hist | edit) [1,106 bytes] Billy1 (talk | contribs) (Created page with " Back to Tool Library ==Tool 14 - 1-1/2" 120 V-Groove Bit 0.2880 loc 1.800 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 14 |- | '''Tool Type''' || V-Groove Bit |- | '''Shank Size''' || 1/4" |- | '''Diameter''' || 1" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 1.8000" |- | '''Length of Cut (LOC)''' || 0.2880" |- | '''Max RPM''' || 24,000 |- | '''Material''' ||...") Tag: Recreated
  • 00:3700:37, 2 March 2026 Nibblerbot/tools/tool 13 (hist | edit) [1,125 bytes] Billy1 (talk | contribs) (Created page with " Back to Tool Library ==Tool 13 - 1-1/2" 150 V-Groove Bit 0.2160 loc 2.000 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 13 |- | '''Tool Type''' || V-Groove Bit |- | '''Shank Size''' || 1/4" |- | '''Diameter''' || 1-1/2" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 1.8000" |- | '''Length of Cut (LOC)''' || 0.2000" |- | '''Max RPM''' || 24,000 |- | '''Material'''...") Tag: Recreated
  • 00:1200:12, 2 March 2026 Nibblerbot/tools/tool 54 (hist | edit) [1,235 bytes] Billy1 (talk | contribs) (Created page with " Back to Tool Library ==Tool 54 - .030" 2 Flute Tapered Ball Nose 0.7500 loc 2.200 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 54 |- | '''Tool Type''' || Tapered Ball Nose |- | '''Shank Size''' || 1/4" |- | '''Diameter''' || 1/33" |- | '''Taper Angle''' || 16.0000° |- | '''Taper Diameter''' || 1/4" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.2000" |- | '''...")
  • 00:0600:06, 2 March 2026 Nibblerbot/tools/tool 53 (hist | edit) [1,234 bytes] Billy1 (talk | contribs) (Created page with " Back to Tool Library ==Tool 53 - .090" 2 Flute Tapered Ball Nose 0.7500 loc 2.200 oal== {| class="wikitable" |- !style="width: 200px;"| Attribute !!style="width: 400px;"| Details |- | '''Tool #''' || 53 |- | '''Tool Type''' || Tapered Ball Nose |- | '''Shank Size''' || 1/4" |- | '''Diameter''' || 5/56" |- | '''Taper Angle''' || 10.0000° |- | '''Taper Diameter''' || 1/4" |- | '''Flutes (FL)''' || 2 |- | '''Overall Length (OAL)''' || 2.2000" |- | '''...")

27 February 2026

  • 13:2313:23, 27 February 2026 FreeCAD (hist | edit) [9,268 bytes] larry (talk | contribs) (Created page with "FreeCAD is the preferred FOSS software used at Knox Makers for CAD (Computer Aided Design) and CAM (Computer Aided Manufacturing). While you are always free to use other platforms you'll find that some of our devices are setup to integrate specifically with FreeCAD using add-ons & packages that have been designed in house to work with our devices. Additionally, peer support from other members will normally be easier to find if you are using FreeCAD versus other alterna...")

16 February 2026

  • 02:5902:59, 16 February 2026 MemberMeeting20260120 (hist | edit) [5,889 bytes] Tracy (talk | contribs) (Created page with "== Member Meeting: January 20, 2026 == === Time & Location === 6:00pm Cookout in the Hospitality Zone 7:00pm at Knox Makers Classroom == Minutes == ===President's Previous Year Report=== *Looking waaay back to the beginnings of Knox Makers **We were fortunate to have our very first space in Oak Ridge, but suddenly were faced with a 30 day eviction notice because the building was changing hands **Luckily Spark saved us at the very last moment and allowed us to move into...")

15 February 2026

  • 22:4322:43, 15 February 2026 BoardMeeting202602 (hist | edit) [4,440 bytes] Tracy (talk | contribs) (Created page with " === Minutes === February 15, 2026 virtually via Big Blue Button * Start time: 4:00 PM * Attendance: Issac M., Sue J., Jondale S., Tracy H., Billy H., Daryl H., Sean S. * Ten general members also in attendance Votes *Voted to approve Adam's first aid refresh budget *Voted to approve hosting FreeCAD North America meetup Meeting end: 4:55 PM === Supplemental Notes === ==== Issac: President ==== *SPARK news: still have not resolved lease situation - it is top priority...")
Retrieved from "https://wiki.knoxmakers.org/Special:NewPages"